About: Ibrar Ayyub

LCD display is great way to display output from your arduino when it not connected to your computer. The common display used in arduino projects is 16×2 parallel LCD display which compatible with the Hitachi HD44780 driver. It can easily recognize with it 16 pin interface. This sketch will print out text message “hello, world” […]

YOU WILL NOT FIND OTHER ITEMS AS DETAILED IN WHOLE INTERNET In this article I provide a list of components and links of purchase to create your drone (quadricopter) remote-controlled from a PC. Who has not dreamed at least once to have a toy really send out by Hi Tech.A tutorial finished you will have a drone […]

In this post I will attempt to describe the steps I took to build the arduino based thermostat shown in the following videos. The first video was taken when around just half of the coding of the menu system was complete, but gives you a basic run through of the features. This second video shows […]

This arduino projects show how to make voltmeter with your arduino. It use voltage divider concept to estimate the voltage input. Instruction; 1) Connect all jumper wire as shown in diagram. Upload this code to your arduino /*   Voltmeter   Voltmeter base on voltage divider concept.   Code based on: http://www.clarenceho.net:8123/blog/articles/2009/05/17/arduino-test-voltmeter   Coded by: arduinoprojects101.com */ // include the library code: #include <LiquidCrystal.h> // initialize the library with the numbers of the interface pins LiquidCrystal lcd(7, 8, 9, 10, 11, 12); […]

This arduino projects show how to read Celsius and Fahrenheit temperature with LM35 temperature sensor. Parts List; 1) 1x 16×2 parallel LCD display (compatible with Hitachi HD44780 driver) 2) 1x Arduino 3) 1x 10kΩ potentiometer 4) 1x LM35 temperature sensor 5) Jumper wire Instruction; 1) Connect all jumper wire as shown in diagram. 2) Connect […]

In this example, you will use your Ethernet Shield and your Arduino to create a simple Web server. Using the Ethernet library, your device will be able to answer a HTTP request with your Ethernet shield. After opening a browser and navigating to your Ethernet shield’s IP address, your Arduino will respond with just enough […]

Arduino projects, running stopwatch on arduino. Arduino projects, running stopwatch on arduino. Parts List;1) 1x 16×2 parallel LCD display (compatible with Hitachi HD44780 driver)2) 1x Arduino3) 1x 10kΩ potentiometer4) 1x 10kΩ resistor5) 1x switch6) Jumper wire Instruction; 1) Connect all jumper wire as shown in diagram. 2) Connect digital input from switch to digital pin […]

This example shows you how to read the values from the joystick. The output will be displayed through the serial monitor and as a color on the RGB LED. The joystick has two axes, X and Y. Each axis controls a color of the RGB LED: red with the X-axis, and green with the Y-axis. […]

Arduino projects, make arduino rpm counter with arduino.   Instruction;1) Connect all jumper wire as shown in diagram. 2) Connect IR LED to digital pin 13. 3) Connect IR Phototransistor (dark) to digital pin 2. Make sure shorter lead connected to digital pin 2 and longer lead to Ground. Upload this code to your arduino/** Optical Tachometer** Uses an IR LED and IR phototransistor to implement an optical tachometer.* The IR LED is connected to pin 13 and ran continually.* Pin 2 (interrupt 0) is connected across the IR detector.** Code based on: www.instructables.com/id/Arduino-Based-Optical-Tachometer/* Coded by: arduinoprojects101.com*/ […]

Arduino HC-SR04 The Arduino HC-SR04 is different from most of those commonly seen on the market, which have 4 pins compared to 3 pins. But the operation principle is the same, transmit signal, and depends on when the signal is received to estimate the distance. Arduino HC-SR04 not only inexpensive but also practical, use a […]