Posts by Ibrar Ayyub:
How to Control arduino by bluetooth from PC
Posted on: 23 Apr 2013
I wanted to make it possible to control an arduino board from my phone. So that I could control other devices. the easiest way seemed to be using bluetooth. but when I received the parts needed I found it want quite as simple as I had hoped. And after looking on the Internet I didn’t […]
Scratching with Arduino
Posted on: 23 Apr 2013
MIT has developed a fantastic visual programming language called Scratch. It is also an amazing learning tool for children, because it is simple, cute, and by providing interaction with the real world by a board called “Scratch Sensor Board”. This Instructable shows the development of a shield for Arduino that can interact with Scratch and replicates the […]
Arduino I/O-Matlab basic tutorial
Posted on: 23 Apr 2013
this is my very first instructables and I was referred by an old member. Follow her link here: (http://www.instructables.com/member/Analogue-Chick/) Its a simple illustration on how we can connect Arduino to Matlab and actually control and get information on Arduino using Matlab I have seen few tutorials regarding how to control or get data from Arduino […]
Connecting a 12V relay to Arduino
Posted on: 23 Apr 2013
To connect a 12V relay to the Arduino you need the following things: – 1 Arduino – 1 diode for example 1N4007 – 1 NPN transistor for example 2N2222 (in the US) or BC548 (in Europe) – 1 relay for example one with coil voltage 12V and switching voltage 125VAC/10 A – 1 multimeter Step […]
Using a Dot Matrix LED with an Arduino and Shift Register
Posted on: 23 Apr 2013
The Siemens DLO7135 Dot matrix LED is one amazing piece of optoelectronics. It’s billed as a 5×7 Dot Matrix Intelligent Display (r) with Memory/Decoder/Driver. Along with that memory, it’s got a 96-character ASCII display set with upper and lower case characters, a built-in character generator and multiplexer, four levels of light intensity, and it all […]
Arduino 4x4x4 LED Cube
Posted on: 22 Apr 2013
Overview: This instructable will cover the building process of an 4x4x4 LED Cube. I will be using an Arduino to control the LEDs. Since the Arduino (Freeduino) has a total of 20 pins (including the analog pins) we will not need to have any multiplexing or shift registers. I will take you though what i […]
Color Changing Night Light with ATtiny using Arduino
Posted on: 22 Apr 2013
I wanted to create something for my wife as a present and this is what I came up with. This is a dark activated color changing night light. It has a sensor that can tell when the room light is turned off. This then will light a RGB LED and slowly fade through different colors. […]
LED Dot Matrix Display using an Arduino
Posted on: 22 Apr 2013
In this project, you shall again use two sets of shift registers. These will be connected to the rows and columns of the dot matrix display. You will then show a simple object, or sprite, on the display and animate it. The main aim of this project is to show you how a dot matrix […]
Simple Relay Shield for Arduino
Posted on: 22 Apr 2013
Shield to control 6 relay, 6 digital input and 6 analog input with Arduino Duemilanove, Arduino UNO. The digital inputs and relay outputs are equipped with an LED that indicates the status. The circuit diagram is very simple: Step 1: Schematics and PCB In this step you can find the circuit diagram and the PCB […]
Squirt – Arduino, motion activated water cannon
Posted on: 22 Apr 2013
Squirt is a motion activated water cannon using Arduino. This was designed for use in the garden but as it’s winter we tested it in the bathroom. It works! True motion tracking is expensive and complicated so this system activates when the victim moves into range and randomises the position of the cannon and the […]
