About: Ibrar Ayyub

In this lab you will be using a program to enter a schematic and lay out a printed circuit board (PCB) that will then be manufactured.  At this point of the semester you don’t know enough to design your own circuit, so I am giving you one that we will use again later in the […]

This Instructable will demonstrate how to make a remotely activated sound file player. It uses an Electric Imp, an Adafruit Wave shield and an Arduino Uno The Electric Imp enables you to quickly connect devices (including arduinos) to the internet through your Wifi network. The Adafruit Wave shield makes it simple to play audio files […]

Bingo! My granddaughter enjoys playing Bingo, so I went out and bought her a cheap set at a local discount store. The cards and the markers are fine, but the spinner disk for selecting the numbers is a piece of garbage. It flew apart about ten minutes into the first game. True, I could have […]

This instructable will show you who to build a rgb lighting system with an Arduino. You can also control it with an iPod/iPhone/iPad using touchOSC. In my previous instructable I showed how to control one rgb led in this you can control heaps with a single chip the ULN2003A. Step 1: Parts You will need […]

Goals Understand the Analog Signals and use your knowledge to program your Arduino and let it play music Get known of the Seven-segment display and use your Arduino Board together with the Shift Register to control the number. In the Second Week you will be asked to implement a circuit to combine these first two […]

***Disclaimer***This instructable is documentation for a work in progress. Although the project is not yet complete, it has reached a place where I believe it can begin to be beneficial to other makers. The concept for this project was spawned when a friend suggested I be Slenderman for Halloween. When I first looked at pictures, […]

Ever wanted a robotic liquor server? I purchased a Lynxmotion robotic arm last year and an Arduino (deci) to play around with. I had it serial controlled with a joystick and it was a great way to start in robotics. More recently I wanted to take on another micro-controller related project for a university science […]

Finalized Prototype Shown below is the finalized prototype. The purpose of the prototype was to demonstrate the feasibility of a small, highly maneuverable search and rescue robot. As such, the completed prototype was successful. Capabilities include a ground speed of 10 inches per second, battery life of 50 minutes, wireless range of between 50 and […]

In this instructable I will show you how you can make your own Atting programming shield for the arduino and then use the arduino as a programmer. Usually If you don’t have a shield you can do a breadboard version to program the ATtiny. (Step1) But here I’ll show you how to program it and […]

You might remember my first set of lights that I put on my dad’s skates. Well those weren’t bright enough and they were a lot of work because I didn’t know how to make PCBs. In this i’ble I’ll cover how to make your own custom PCBs in under an hour! Keep in mind, if […]