About: Ibrar Ayyub

In this Instructable, we’ll teach you how to create your own “Would you rather… ” board game using conductive paint, an Arduino microcontroller, and some electronics components. Players take turns moving along the game path as directed by an electronic dice roll. Along the way, they answer questions each time their piece lands on an […]

This instructable is a quick write-up of my experience creating a multifunctional moodlight. Some basic knowledge of electronic circuits is expected. The project has not yet finished, some adding functionality  and tweaking has to be done but it is already functional. If you guys are enthousiast about this instructable I will update it. At the […]

Last year I needed a board that I could stick my breadboards to, that would also securely hold my Arduino. I used some Plexiglas I picked up at Skycraft in Orlando and I glued everything together with Crazy Glue. This worked well, but it didn’t give me the freedom to reconfigure or put something on […]

Hi, all! Today I’ m trying to explain you my last project: “The morse code generator by a PS\2 keyboard” I’ ve used an PS/2 keyboard to send input to my Arduino board (like described in here) and transform it in morse code that activate a speaker and a relay. Components: – PS\2 keyboard – […]

Arduino: Nokia LCD & Sensors PROBLEM: Making my Arduino, a Temperature-Relative Humidity sensor and a Nokia3310LCD screen work together. Now, I’m a Lazy Old Geek, so what I wanted was an Arduino kit that would take shields. This Freeduino was the cheapest that I could find at the time. http://www.seeedstudio.com/depot/freeduino-usb-complete-kit-p-58.html?cPath=79_82 Since I was at Seeedstudio, […]

Follows are directions for programming the ATtiny microcontrollers using the Arduino IDE. In plain English, this is how to program 8-pin Atmel chips as you would normally an Arduino. This is cool because the ATtiny is tiny, and – well – this allows you to make tiny things that don’t need a big ol’ microcontroller. […]

RFID tags are all over the place.  They’re used in building access control systems, passports, inventory tracking . . .   This instructable will show how you can use an Arduino and a few simple components (wire coil, transistor, capacitor, resistor) to make a device that can spoof an 125 KHz (low frequency) RFID tag. […]

Huge List of tutorials & Components based resources & info from glossary wise.

Have you ever wanted an ultrasonic tape measure, like this Stanley? (See picture). Well, I have but then I am a Lazy Old Geek. I don’t really need one but I thought I’d try to make one. And naturally, I thought of an Arduino. August 2012 update: I just found out the software used in […]

Here’s a brief tutorial that should get you up and running interfacing your Adruino with a MySQL database. For the sake of this tutorial, I am assuming you know how to set up and use MySQL. This tutorial does not require much Python experience, but you will be required to install two Python libraries for […]