About: Ibrar Ayyub

In this article we are going to see about what is PCB board and some types of PCB board. A PRINTED CIRCUIT BOARD (PCB) mechanically supports and electrically connects electronic components or electrical components using conductive tracks, pads and other features etched from one or more sheet layers of copper laminated onto and/or between sheet  […]

The miniscule event counter based on a microcontroller is built using the affordable Digispark Attiny development board. A benefit of this design is that it can be connected to its trigger input regardless of whether it is an active or passive switch. Every time the switch is turned on, the microcontroller will count the event […]

Arduino is not restricted to receiving data from sensors only; you have the ability to also link a full-size PS/2 keyboard and type as you would on a traditional computer. Attaching a keyboard to an Arduino may seem strange (since it’s a small microcontroller), however, it should be noted that an Arduino has greater processing […]

Save MIDI files on an SD Card and use an SD shield connected to your Arduino to play these songs on a MIDI device. This project demonstrates the development of a MIDI player using Arduino. The Arduino is connected to a DS1307 Data Logger Shield that has an SD Card reader. A MIDI stream is […]

Hello everyone! My age is twenty years. I started using my Arduino for the first time during Christmas, and I have been busy working on Arduino projects to create this instructable for you. I trust that it will be beneficial! The purpose of this project was to build a stepping stone from remote controlled flight […]

This tutorial shows you how to use a Piezo element to detect vibration, in this case, a knock on a door, table, or other solid surface. A piezo is an electronic device that produces a voltage when it undergoes physical deformation from a vibration, sound wave, or mechanical strain. Likewise, applying voltage to a piezo […]

This project is an independent fan speed regulator that automatically adjusts the speed of an electric fan based on real-time feedback. The use of embedded system technologies like a microcontroller and closed-loop control architecture enables successful and reliable temperature regulation. The ATMega8/168/328 microcontroller allows for rapid adjustment of fan speed based on real-time sensor information. […]

Automatic Water Dispenser using Arduino Approximately 71% of the Earth’s surface is water, yet only a meager 2.5% of it is potable. Due to increased population, pollution, and climate change, it is anticipated that we will face year-round water scarcity as early as 2025. On one side, there are already small disagreements between countries and […]

Today we are constructing an Arduino-based Automatic Pet Feeder that can dispense food to your pet at scheduled times. It includes a DS3231 RTC Module to establish the feeding schedule for your pet with accurate time and date settings. Therefore, the device will automatically dispense or refill the food bowl at the set time based […]

In this tutorial, I will demonstrate how to create a mosquito repellent device with the help of an Arduino. The repellent comes in a shield form that can be connected to the Arduino board, allowing for easy modification of its frequency. This project is perfect for camping and hiking outdoor activities, as it emits a […]