OPT3001 – Ambient Light Sensor




The OPT3001 is a sensor that measures the intensity of visible light. The spectral response of the sensor tightly matches the photopic response of the human eye and includes significant infrared rejection.

OPT3001 – Ambient Light Sensor




The OPT3001 is a single-chip lux meter, measuring the intensity of light as visible by the human eye. The precision spectral response and strong IR rejection of the device enables the OPT3001 to accurately meter the intensity of light as seen by the human eye regardless of light source. The strong IR rejection also aids in maintaining high accuracy when industrial design calls for mounting the sensor under dark glass for aesthetics. The OPT3001 is designed for systems that create light-based experiences for humans, and an ideal preferred replacement for photodiodes, photoresistors, or other ambient light sensors with less human eye matching and IR rejection.

Measurements can be made from 0.01 lux up to 83k lux without manually selecting full-scale ranges by using the built-in, full-scale setting feature. This capability allows light measurement over a 23-bit effective dynamic range.

The digital operation is flexible for system integration. Measurements can be either continuous or single-shot. The control and interrupt system features autonomous operation, allowing the processor to sleep while the sensor searches for appropriate wake-up events to report via the interrupt pin. The digital output is reported over an I2C- and SMBus-compatible, two-wire serial interface.

The low power consumption and low power-supply voltage capability of the OPT3001 enhance the battery life of battery-powered systems.

Features

  • Precision Optical Filtering to Match Human Eye:
    • Rejects > 99% (typ) of IR

     

For more detail:  OPT3001 – Ambient Light Sensor




Clip to Evernote

Leave a Comment

(Spamcheck Enabled)

Read previous post:
Control Arduino Wirelessly
Control Arduino Wirelessly with MATLAB

Been seeing few DIYs on how to establish a communication between MATLAB application and Arduino that is hardwired to PC....

Close
Scroll to top