Arduino Wifi Shield is back on the store!




Overview

The Arduino WiFi Shield connects your Arduino to the internet wirelessly. Connect it to your wireless network by following a few simple instructions to start controlling your world through the internet. As always with Arduino, every element of the platform – hardware, software and documentation – is freely available and open-source. This means you can learn exactly how it’s made and use its design as the starting point for your own circuits.

ArduinoWiFiShieldPinUseDescribed_2.jpg




Description

The Arduino WiFi Shield allows an Arduino board to connect to the internet using the 802.11 wireless specification (WiFi). It is based on the HDG104 Wireless LAN 802.11b/g System in-Package. An Atmega 32UC3 provides a network (IP) stack capable of both TCP and UDP. Use the WiFI library to write sketches which connect to the internet using the shield. The WiFI shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top.

The WiFi Shield can connect to wireless networks which operate according to the 802.11b and 802.11g specifications.

There is an onboard micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Uno and Mega. The onboard microSD card reader is accessible through the SD Library. When working with this library, SS is on Pin 4.

 

For more detail: Arduino Wifi Shield is back on the store!




Clip to Evernote

Leave a Comment

(Spamcheck Enabled)

Read previous post:
(semi) automated drill press table for PCB manufacture
(semi) automated drill press table for PCB manufacture

Motivation As you may have seen in earlier articles, I produce my own PCBs at home with the toner transfer...

Close
Scroll to top