Electronics News Updates

RS ADDS RENESAS SYNERGY S5D3 MCU AND DEVELOPMENT BOARD

RS ADDS RENESAS SYNERGY S5D3 MCU AND DEVELOPMENT BOARD

Renesas Synergy™ TB-S5D3 Target Board Kit helps designers evaluate the operation and performance of the S5D3Microcontrollers. The S5D3 Target Board Kit offers initial firmware development and evaluation of the Synergy Software Package (SSP) on the Synergy™ S5D3 Microcontrollers. The Kit connects via a USB connector for the main MCU, or two PMOD connectors, and a selection of Pin […]

RS ADDS RENESAS SYNERGY S5D3 MCU AND DEVELOPMENT BOARD Continue Reading

NOVASOM LAUNCHES THE SBC U1 IOT SBC BASED ON ESP32

NOVASOM LAUNCHES THE SBC-U1 IOT SBC BASED ON ESP32

Novasom – the SBC manufacturing company, is famous for its two set of product lines, the U-Line for low power IoT devices and M-Line for multimedia processing based applications. Their products are Intel and ARM processors based for different applications and operating systems. Their latest board in the market is the SBC-U1 which is based on the popular ESP32. The SBC-U1 comes in two main variants. One with the name of Novasom

NOVASOM LAUNCHES THE SBC-U1 IOT SBC BASED ON ESP32 Continue Reading

STMICROELECTRONICS LAUNCHES STM32MP1 IOT MICROPROCESSOR SERIES

STMICROELECTRONICS LAUNCHES STM32MP1 IOT MICROPROCESSOR SERIES

STMicroelectronics, a global semiconductor leader serving customers across the spectrum of electronics applications, is applying its Arm® Cortex® expertise to expand the capabilities of its industry-leading STM32 MCUportfolio to applications requiring even more performance, resources and large open-source software. The introduction of the STM32MP1 multicore microprocessor series with compute and graphics support combined with power-efficient real-time control

STMICROELECTRONICS LAUNCHES STM32MP1 IOT MICROPROCESSOR SERIES Continue Reading

NEW LAMBDA LORA MODULE SERIES ACHIEVE 22KM RANGE

NEW LAMBDA LORA MODULE SERIES ACHIEVE 22KM+ RANGE

The new LAMBDA series of RF modules have been introduced as part of the LoRa collection at RF Solutions; LAMBDA62 and LAMBDA80. The LAMBDA modules incorporate the impressive Semtech SX1262 and SX1280 LoRa, providing ultra-long range. Spread spectrum communication and high interference immunity within minimal current consumption, provides an extremely high performance and cost-effective transceiver module. Available as 868MHz, the LAMBDA62 has an integrated

NEW LAMBDA LORA MODULE SERIES ACHIEVE 22KM+ RANGE Continue Reading

THE SEMI RUGGED RTC 1010M DO MORE WITH THE TABLET BUILT FOR WORK

THE SEMI-RUGGED RTC-1010M: DO MORE WITH THE TABLET BUILT FOR WORK

10.1″ Semi-rugged Tablet Features With Intel® N3350 / N4200 Processor With Windows® / Android AAEON, a major developer in Industrial Rugged Tablet Solutions, announces the RTC-1010M Semi-Rugged Tablet. The RTC-1010M builds on AAEON’s experience in rugged tablet design. Featuring a 10.1” sunlight readable screen, IP54 certification and a wide range of options and features, the RTC-1010M

THE SEMI-RUGGED RTC-1010M: DO MORE WITH THE TABLET BUILT FOR WORK Continue Reading

BOURNS LAUNCHES ULTRA LOW 0.15 PSI PRESSURE SENSOR

BOURNS LAUNCHES ULTRA-LOW 0.15 PSI PRESSURE SENSOR

Bourns, Inc., a leading manufacturer and supplier of electronic components, today announced the expansion of its line of environmental sensors adding an ultra-low 0.15 to 1.0 PSI pressure sensor. Bourns® Models BPS110/BPS120 pressure sensors are based on state-of-the-art Micro-Electro-Mechanical Systems (MEMS) technology, which provides extremely accurate condition readings in a miniature package size. Designed to deliver superior performance in applications where

BOURNS LAUNCHES ULTRA-LOW 0.15 PSI PRESSURE SENSOR Continue Reading

PICOCORE MX8MM FEATURES I.MX8 MINI AND RUNS LINUX

PICOCORE MX8MM FEATURES I.MX8 MINI AND RUNS LINUX

F&S Elektronik Systeme has unveiled its 40 x 35mm “PicoCore MX8MM” module which runs Linux on a quad-A53, 1.8GHz i.MX8 Mini with up to 8GB LPDDR4 and 32GB eMMC plus WiFi/BT, a GbE controller, PCIe, and optional -40 to 85°C support. The PicoCore MX8MM is a i.MX8M variant with lower video resolution, but a faster clock rate. The PicoCore MX8MM has the same

PICOCORE MX8MM FEATURES I.MX8 MINI AND RUNS LINUX Continue Reading

UCHIP ARDUINO ZERO COMPATIBLE IN A NARROW DIP 16 PACKAGE

UCHIP: ARDUINO ZERO COMPATIBLE IN A NARROW DIP-16 PACKAGE!

A very small narrow-DIP-sized, Arduino Zero compatible USB dev board (OTG enabled), with integrated buck and boost power supplies! The Arduino ecosystem provides an invaluable resource of hardware and software, which allows quick development of a myriad of projects thanks to its fruitful community. Several Arduino-compatible boards came out in the past years, to increase

UCHIP: ARDUINO ZERO COMPATIBLE IN A NARROW DIP-16 PACKAGE! Continue Reading

LATEST TYSOM KIT ACCELERATES THE DEVELOPMENT OF AI

LATEST TYSOM KIT ACCELERATES THE DEVELOPMENT OF AI

Aldec’s TySOM-3A-ZU19EG embedded system development board, showcased at Embedded World 2019, supports the early co-development and co-verification of hardware and software. Aldec, Inc., a pioneer in mixed HDL language simulation and hardware-assisted verification for FPGA and ASIC designs, has launched the TySOM-3A-ZU19EG, to assist in the development of AI, Deep-learning Neural Network (DNN) and other applications

LATEST TYSOM KIT ACCELERATES THE DEVELOPMENT OF AI Continue Reading

CONGATEC ANNOUNCES A COM EXPRESS TYPE 7 MODULES FOR THE AIRCRAFT INDUSTRY

CONGATEC ANNOUNCES A COM EXPRESS TYPE 7 MODULES FOR THE AIRCRAFT INDUSTRY

A new milestone is hit by Congatec, as they recently announced Type 7 modules. Congatec has struggled hard to take Linux friendliness to the very next level and to make server response to quickest possible till date. To do that, two Type 7 modules are introduced to the market which provide support of up to 96GB DDR4 and designed for converged edge servers

CONGATEC ANNOUNCES A COM EXPRESS TYPE 7 MODULES FOR THE AIRCRAFT INDUSTRY Continue Reading

Scroll to Top