Posts by Ibrar Ayyub:
Using an Arduino to Control an Infrared Helicopter
Posted on: 27 Mar 2013
In this Instructable we will explain how infrared signals are used by a remote to control a toy or device, then show how a simple circuit can be added to an Arduino to operate the same device through free, Open Source software. This document is part of a series covering the Puzzlebox Orbit, a brain-controlled helicopter that features […]
Burning the Bootloader on ATMega328 using Arduino UNO as ISP
Posted on: 27 Mar 2013
I had one remote controlled project that needed an Arduino running 24/7 but I didn’t want to leave my $32 Arduino UNO, so I decided to buy some pieces and created my own Arduino. The most important part was buying the microcontroller. These were my options: ATMega328P-PU with Optiboot ~ $5.50 (Sparkfun) / $5.19 (Digikey) […]
Arduino Board Step Sequencer
Posted on: 26 Mar 2013
I was wondering about on making a sequencer, a big 16 step sequencer was what I wanted to make. To it’s full extension with lots of features including single leds for each step, midi input and output, etc. Then I realised that I should start from a more basic model and then maybe tweak around to see […]
DIY Arduino Motor Shield
Posted on: 26 Mar 2013
Today, I’m going to show you how to make an Arduino motor shield (driver) at a low cost. It works splendidly, its posses almost all the characteristics of the original Arduino motor shield. It’s almost considered as a clone. The original Arduino motor shield has the same motor driver chip (L298), the only difference with it, […]
Jeopardy Ring-in Buttons with Built-in Rules using Arduino
Posted on: 26 Mar 2013
There are several good Jeopardy/Game Show lockout buttons/buzzers, but none incorporate the timing rules of Jeopardy. I am learning about the Arduino and I thought that this would be a great project to practice with. The rules include a question reading period with no timeout to reading the question. During this period, any player who […]
Localizer with SIM908 module using Arduino
Posted on: 23 Mar 2013
The device is based on a GSM/GPRS module with included GPS. Its main function is to detect and communicate its own geographical position using, on the choice, the cellular phone reference system or the GPS. Its small dimensions are due to the use, for the first time, of a GSM/GPRS module integrating the GPS receiver. […]
GSM GPS shield for Arduino Board
Posted on: 23 Mar 2013
Shield for Arduino designed and based on the module GSM/GPRS SIM900 or the GSM/GPRS & GPS module SIM908, to make calls, voice and data connections via GPRS. HARDWARE INNOVATIONS This new version (old Arduino GSM shield) has several new hardware features, that allow maximum customization and provide many configurations. We begin with the supply circuit […]
Low cost Ethernet shield with ENC28J60 using Arduino
Posted on: 23 Mar 2013
Economical alternative to original Arduino ethernet shields, allows data rates up to 10 Mbps and is achieved with a traditional assembly components. One of the most interesting shield that you can mount on the Arduino platform is certainly the ethernet shield, because enable numerous networking applications such as remote control of systems and users, web […]
Wi-Fi Body Scale with Arduino Board
Posted on: 23 Mar 2013
In this post we present the design of a scale that connects to the Internet and automatically sends weight info on a Google Document. The project is composed of Arduino Uno board Wi-Fi shield additional shield that we used to manage data collection and I/O with a clear and comfortable and clear LCD display Velleman scale […]
Big Spectrum Analyzer with Arduino
Posted on: 23 Mar 2013
Let’s put together a pixel strip with an HL1606, an Arduino UNO and the Spectrum Shield to build a seven bands “large” Spectrum Analyzer of simple construction. The Strip used uses the HL1606 controller to allow direct management of each of the LEDs. The chip runs two RGB groups and has 4-pin for input/output. The […]
