Posts by Ibrar Ayyub:
Arduino powered GLCD (Graphic LCD)
Posted on: 09 Apr 2013
Displays are always nice. So far I’ve just been demonstrating how to use 7-segmented displays to display numbers using very few resources. But what if you want to display text? Or pictures? Or both? Well in order to do that, you’re going to need a simple LCD screen. Now there are simple led screens out […]
Ultrasonic Range Finder with an ATtiny85 using an Arduino
Posted on: 08 Apr 2013
I’m here to show you how to use a HC-SR04 Ultrasonic Range Finder with an ATtiny85 as well as programming the ATtiny85 using the wonderful shield that randofo created. List of materials: ATtiny85 Programming Library Arduino Uno HC-SR04 Ultrasonic Range Finder and Library Jumper Wires Breadboard ATtiny85 Step 1: Program the Arduino Before you connect your shield to the Arduino […]
Auto Leveling Laser Cross using Arduino
Posted on: 08 Apr 2013
So this Lazy Old Geek purchased a Laser Cross. I created a manual leveling Laser Cross to use for aligning stuff on my drill press: http://www.instructables.com/id/ManualLevelingLaserCross/ Well, being a Geek I decided to make an automated platform that adjusts automatically with an Arduino. Well, the picture may look a little scary but I’ll break it […]
Arduino LCD Metronome
Posted on: 08 Apr 2013
Connecting the LCD The first step is to wire up the LCD. The HD44780 has 16 pins: Pin 1 – Vss Pin 2 – Vdd Pin 3 – Vo Pin 4 – RS Pin 5 – R/W Pin 6 – E Pin 7 – DB0 Pin 8 – DB1 Pin 9 – DB2 Pin 10 […]
RGB LED Rainbow Fader using an Arduino
Posted on: 08 Apr 2013
Introducing the RainBoard: A simple RGB LED Rainbow fader using an Arduino Uno and a few simple components. Believe it or not, we will control 45-channels of RGB LEDs at 32 brightness levels using only 3 digital pins from the Arduino! How is this possible you ask? By using two magic concepts: Shift Registers, and […]
Serial Servo Controller with Arduino
Posted on: 08 Apr 2013
I’m going to show you how to use your Arduino to control up to 12 servos at once with minimal jitter. Using a simple serial interface you can control the position of up to 12 servo channels. Up to 10 snapshot positions can be saved and played back at any time. Start up values for […]
Power off from an Arduino Sketch using the Pololu Power Switch
Posted on: 06 Apr 2013
If you need an Arduino to shut off from within your Sketch, this is the solution. We will explore wiring the Pololu Pushbutton Power Switch, programming the Arduino to shut off the power, and making the unit “power on” only. The Pololu Pushbutton Power Switch comes in two versions – the SV version geared towards […]
Using The PCF8575 i2c i/o Expander To Read Inputs With Arduino
Posted on: 06 Apr 2013
This Instructable will show you just how easy it is to add extra inputs to your Arduino. You can use this technique to add hundreds of extra inputs to your Arduino with only two wires by using a fancy communication protocol called i2c (eye-squared-see). What I have used… PCF8575 SMD to DIP breakout board Teensy-Arduino (any Arduino […]
Arduino 2-axis servo solar tracker
Posted on: 05 Apr 2013
What is a solar tracker? A solar tracker can increase the efficiency of a solar panel by up to 100%! It does this by always keeping the panel perpendicular to the incoming rays of sunlight. here’s an equation to prove this: P = AW sin θ P = power generated by the solar panel A […]
Ethernet Switching – with Arduino
Posted on: 05 Apr 2013
Aim: Switch relays from the ethernet or the internet, using your mobile, tablet or computer with a nice graphical user interface. Update V4.06 Please read the below steps to Step 2 if you are viewing this article for the first time. Please go to step 3 for the latest revision which is V4.06 Material: * […]
