About: Ibrar Ayyub
Posts by Ibrar Ayyub:
Interrupts Debouncing with Zerynth (Python for IoT)
Posted on: 17 May 2019
In this tutorial, we’ll see the advanced feature of interrupt debouncing using Zerynth. Things used in this project Hardware components Arduino MKR1000 × 1 Jumper wires (generic) × 1 Software apps and online services Zerynth Studio Story https://www.youtube.com/watch?v=iX2AlezDPVE&feature=youtu.be In this tutorial, we’ll use PWM to show the advanced feature of interrupt debouncing. PWM triggers fall and […]
Smart Plastic Container
Posted on: 16 May 2019
A special container for store objects, iot-ready. It is able to keep track of stocks stored inside and notify when stocks are low! Things used in this project Hardware components SparkFun hx711 × 1 Adafruit Standard LCD – 16×2 White on Blue × 1 Arduino MKR1000 × 1 LED (generic) × 1 Hand tools and […]
Optical Theremin Musical Instrument Using Arduino Uno Board
Posted on: 15 May 2019
Theremin is an early electronic musical instrument controlled without physical contact by the thereminist (performer). It is named after the Russian inventor, Léon Theremin, who patented the device in 1928. A typical theremin musical instrument is shown in Fig. 1. This article explains how you can build an optical theremin using an Arduino Uno board and some […]
Smart City Project
Posted on: 15 May 2019
Open source air quality sensor network platform. Things used in this project Hardware components Arduino MKR1000 × 1 PMS5003 dust sensor × 1 Breadboard (generic) × 1 Male Header 40 Position 1 Row (0.1″) × 1 SparkFun Snappable Protoboard × 1 Software apps and online services Snappy Ubuntu Core Arduino IDE Digital Ocean It’s a […]
Pick to Light Project 2 WiFi
Posted on: 14 May 2019
In the second project in my pick to light, I am using WIFI to pass the data between PC and Arduino. Things used in this project Hardware components Arduino MKR1000 × 1 LED (generic) × 2 Jumper wires (generic) × 1 SparkFun Pushbutton switch 12mm × 1 Resistor 10k ohm × 1 Resistor 330 ohm […]
Arduino-based Front Office Visitor Alarm
Posted on: 13 May 2019
This Arduino based visitor alarm is useful for offices, clinics and shops. It alerts you to the entry of a visitor by producing a beep sound every time the door is opened. The alarm automatically switches off after a few seconds. Circuit and working Circuit diagram of the Arduino based visitor alarm is shown below. […]
Azure Stream Analytics saving lives!
Posted on: 13 May 2019
Azure Stream Analytics watches sensors, control device autonomously, send Tweets and alerts in case of a hazard. Controllable by smartphone. Things used in this project Hardware components Arduino MKR1000 × 1 SparkFun Graphic LCD 84×48 – Nokia 5110 × 1 Texas Instruments LM2596 DC-DC 4.5-40V Adjustable Step-down Power Supply Module × 1 DHT11 Temperature & […]
Hackable Christmas Greeting Card
Posted on: 12 May 2019
In this post we will make a cool Christmas greeting card with the possibility of changing the music and much more, with Cayenne IoT. Things used in this project Hardware components Arduino MKR1000 × 1 LED (generic) × 1 Buzzer × 1 Jumper wires (generic) × 1 Christmas Greeting Card × 1 Software apps and […]
Control your Human-Like Robot from Anywhere you Are!
Posted on: 11 May 2019
Buto is my ‘real steel’ robot project. Now, BuTO has been connected to the Internet and can be controlled remotely. Things used in this project Hardware components Arduino MKR1000 × 1 Arduino UNO & Genuino UNO × 1 Dynamixel Servo MX-64T × 2 Dynamixel Servo AX-18A × 2 Hitec HS-225BB Servo × 2 BTS7960B Driver […]
Using IoT to Remotely Control a Robotic Arm
Posted on: 10 May 2019
Controlling a robotic arm to pick up and drop objects is difficult enough, without IoT it would be near impossible to do this remotely. Things used in this project Hardware components Arduino MKR1000 × 1 Software apps and online services MATLAB Arduino IDE Hand tools and fabrication machines Laser cutter (generic) Story Introduction I really […]