News & Updates

Berkeley’s Tiny Flying Ionocraft Can hover using No Moving Parts

Berkeley’s Tiny Flying Ionocraft Can hover using No Moving Parts

A research team from UC Berkeley Univercity (Daniel S. Drew, Nathan O. Lambert, Craig B. Schindler, and Kristofer S. J. Pister) has designed and build mini microbot that is capable of taking flight without any motor or moving part. This is all achieved using electrohydrodynamic thrust to provide lift, which is a technique to create air-flow […]

Berkeley’s Tiny Flying Ionocraft Can hover using No Moving Parts Continue Reading

Keysight 34465A Digital Multimeter 6 ½ Digit Truevolt DMM

Keysight 34465A Digital Multimeter, 6 ½ Digit, Truevolt DMM

Keysight 34465A & 34470A DMMs offer unprecedented levels of accuracy, speed and resolution. They can measure very low current down to a 1 μA range, enabling their use on very low power devices. The ability to auto-calibrate during the measurement allows the 34465A and 34470A to maintain a calibrated measurement while the instrument may be

Keysight 34465A Digital Multimeter, 6 ½ Digit, Truevolt DMM Continue Reading

Catena 4710 – LoRaWAN based Feather compatible FPGA board with RISC V Core

Catena 4710 – LoRaWAN based Feather-compatible FPGA board with RISC-V Core

With the increase of high integration programmable chips, FPGAs are getting more and more popular. FPGAs has been traditionally known to be generally complex, but a new line of FPGAs have been showing some promise and that is believed that will help increase their popularity. Tiny FPGAs are the next promising thing, they are low-cost

Catena 4710 – LoRaWAN based Feather-compatible FPGA board with RISC-V Core Continue Reading

SiTime presents a family of MEMS oscillators for mobile applications

SiTime presents a family of MEMS oscillators for mobile applications

Low-Power Oscillators SiTime Corporation’s general purpose low-power oscillators offer a perfect combination of low power consumption, excellent stability, small size, and fast start-up. Parts are also available in an SOT23 package which offers excellent board-level solder-joint reliability and enables low-cost, optical-only board-level inspection. Now system designers have lower frequency options based on programmable MEMS timing

SiTime presents a family of MEMS oscillators for mobile applications Continue Reading

2.8Vin to 22Vin 2A lout 4 Switch Integrated Buck Boost Converter with I2C Interface

2.8Vin to 22Vin, 2A lout, 4-Switch Integrated Buck-Boost Converter with I2C Interface

Monolithic Power Systems has introduced a new synchronous, 4-switch integrated buck-boost converter, the MP8862. The converter can regulate the output voltage from a wide input voltage range of 2.8V to 22V with high efficiency. The converter supports an Iout of 2A. Vout ranges from a 1V minimum to a maximum of 20.47V with a 5mV resolution

2.8Vin to 22Vin, 2A lout, 4-Switch Integrated Buck-Boost Converter with I2C Interface Continue Reading

MLX90641 – Far infrared thermal sensor array with 16x12px resolution

MLX90641 – Far infrared thermal sensor array with 16x12px resolution

The MLX90641 is a 16×12 pixel IR array housed in an industry standard 4-lead TO39 package and is able to accurately measure temperatures in the range of -40 °C to +300 °C. The factory-calibrated devices ensure an accuracy of 1 °C in typical measurement conditions. The high accuracy is further supported by a Noise Equivalent

MLX90641 – Far infrared thermal sensor array with 16x12px resolution Continue Reading

Scroll to Top