Frozen Pipe Alarm




Winter is coming. So it is time to make preparations. If you live in a colder climate, you need to be concerned about the possibility of your pipes freezing. There are a lot of preventative measures that you can take such as insulating your pipes and leaving the water dripping. But for a little extra peace of mind, I designed a simple alarm that will notify me if the pipes are getting too cold and are in danger of freezing.

Frozen Pipe Alarm

Step 1: Watch the Video

Here is a video walkthrough of the project.

Step 2: Materials

Here are the materials and tools that you will need for this project.

Materials:

Arduino Microcontroller

Thermistor

10 kohm Resistor

Jumper Wires

LED

Piezo Buzzer

Project Enclosure

Printed Circuit Board

Glass of Ice Water

Plastic Bag

Tools:

Soldering Iron

Knife

 

For more detail: Frozen Pipe Alarm




READ  Control ESP8266 over the internet

Leave a Comment

*
= 5 + 7

(Spamcheck Enabled)

Read previous post:
I2C Communication With An Infrared Temperature Sensor
I2C Communication With An Infrared Temperature Sensor

Introduction Contents [hide] 1 Introduction 2 What You’ll Need to Know 3 Things You’ll Need 4 Connect the temperature sensor 5...

Close
Scroll to top