Posts by Ibrar Ayyub:
How to Install the Arduino to the Lithium Backpack using arduino
Posted on: 23 Feb 2016
The Arduino is an open source hardware input and output circuit and the Lithium Backpack is a Ardino accessory that will power the Arduino when it is away from a computer or a wall power. These products are sold at Liquidware for under $34 each. Step 1: Plug in the battery connector to the board. […]
How to Connect a Microphone to an Arduino
Posted on: 23 Feb 2016
In this project, we will go over how to connect a microphone to an arduino so that the arduino can detect whether there is sound in the environment or not. This circuit is only capable of detecting whether there is sound in the environment or not. It won’t be able to record the words that […]
Spectrographic Auroral Indicator – A Northern Lights Warning Device using arduino
Posted on: 22 Feb 2016
3/16/2011 EDIT: The Wing Kp Predicted Geomagnetic Activity Index model is now deployed and operational. Costello is now considered non-operational and will be discontinued on 23 Mar 2011. Comments and questions are welcomed at [email protected] The Wing Kp Predicted Geomagnetic Activity Index model is known to perform well for large geomagnetic storms and includes both […]
How to Integrate a Temperature Sensor Circuit to an LCD
Posted on: 22 Feb 2016
In this project, we will go over how we can build a temperature sensor circuit and integrate it to an LCD so that we can get a readout of the temperature on the LCD. In previous projects with temperature sensor circuits, we built the circuit and then got a readout on the computer that we […]
How to Build a LM335 Temperature Sensor Circuit
Posted on: 21 Feb 2016
In this project, we will demonstrate how to build temperature sensor circuit using a LM335 sensor. As a temperature sensor, the circuit will read the temperature of the surrounding environment and relay this temperature to us back in degrees Kelvin. The difference between an LM335 and LM34 and LM35 temperature sensors is the LM335 sensor […]
How to Connect and Read a Keypad with an Arduino
Posted on: 21 Feb 2016
n this project, we will go over how to integrate a keyboard with an arduino board so that the arduino can read the keys being pressed by a user. Keypads are used in all types of devices, including cell phones, fax machines, microwaves, ovens, door locks, etc. They’re practically everywhere. Tons of electronic devices use […]
Make an Ultrasonic Distance Calculator
Posted on: 21 Feb 2016
Arduino Project – The distance calculator I have been playing with Arduino (micro-controller) for about 2 years now and I am becoming more and more passionate about circuits. For those who are not aware of Arduino, check out my article “Arduino – A Guide for Beginners“. Recently, I was testing some new components that I […]
How to Build a TMP36 Temperature Sensor Circuit
Posted on: 20 Feb 2016
In this project, we will demonstrate how to build temperature sensor circuit using a TMP36 sensor. As a temperature sensor, the circuit will read the temperature of the surrounding environment and relay the temperature to us back in degrees fahrenheit. The IC we will use to measure the temperature is the TMP36 IC. We will […]
Hard Drive Persistence of Vision (HDPOV) using arduino
Posted on: 19 Feb 2016
The platter of a hard drive spins well over sixty times a second. If a narrow slot was cut into the platter to allow LEDs to shine through, we can achieve flicker fusion and trick the eye into seeing a stable image. This phenomenon is known as persistence of vision (POV). There are many examples […]
How to Drive a 7 Segment LED Display with an Arduino
Posted on: 19 Feb 2016
In this project, we will show how to drive a single 7 segment LED display with an arduino microcontroller. A 7 Segment LED Display is an electronic device housing 8 individual LEDs. Using this device, we can display all numerals and many alphabetical characters and many more types of symbols. The 7 segment LED is really a […]
