About: Ibrar Ayyub

Concepts So you know what a switch is, but what can you do with it? One of the uses of a switch is to tell the controller to activate/deactivate different components. In this case we are going to use the switch to turn on and off an LED. We will do this by checking to […]

I created the Nursery Rhyme Hat for a class on youth and technology.  I’m new to instructables and e-textiles, so please bear with me! This is the first time I have used the Lilypad Arduino or any kind of soft circuit technology, so my coding is borrowed from several others (more on my code in […]

This is my take on the clasic Pong clock with an RGB back light that changes every time the date is displayed. A big thanks to mrnick1234567 and his http://www.instructables.com/id/Pong-Word-Clock/ I did want the light to change randomly through the day but it made a mess of the coding for the clocks. The latest version simply selects […]

Tutorial 1 Part One Materials needed for tutorial Working BBB, RBBB, Arduino, or other Arduino compatible (BBB shown in photos) Solderless breadboard 22 gauge solid wire for use with breadboard 3 6mm momentary switches 8 LED’s, any color 8 1k resistors, (470 ohm or 220 ohm will also work fine if you want brighter LEDs) […]

For a youth and technology class, we were assigned the creation of an Arduino LilyPad project.  I liked the idea of connecting the LilyPad project to literacy, so I chose to make a Kindle case that would play music [Hedwig’s Theme from the Harry Potter movies] and display white LED lights—illuminating the word read—when the […]

This guide will take you through the steps to build an NES playing robot You will need: An Arduino Duemilanove (other boards will probably work, but you will have to adjust the steps for your device) Working NES Console Super Mario Bros. (Note: this must be only the single game, not the two- or three-in-one […]

ProtoShield Remixed v1.0 description: Build your own Arduino shield using the compact and flexible Proto Shield kit. Solder together a limitless range of circuits and reuse it in all your Arduino projects. A standard 0.1″ prototyping grid accepts commonly used through-hole parts and chips. You could also find a range of basic components are included […]

I SHALL CALL HIM ” PEE-WEE ” Personal Electronics Entertainment With Embedded Education. Basically a project that is fun and I learn a hole lot of stuff from it. . This project started out as just a small robot so I could learn more about my Arduino and coding. And at first he was a […]

Note: to see everything on one page, please go to: www.tweetingcatdoor.com After receiving many emails requesting Instructions and Kits for building the “Tweeting Cat Door “, I decided to make a version that is stand-alone and doesn’t need a computer to be run and that is easy to be put together by anyone with a […]

The Photometric System The photometric camera for the SDSS consists of two TDI scanning CCD arrays, one, using 30 Tektronix/SITe 2048 x 2048 CCDs in a 5 by 6 array for five-color photometry, and the other using 24 2048 x 400 chips for astrometry and focus monitoring. We here discuss these arrays, the filter system, […]