About: Ibrar Ayyub

This is a project that I quickly made one night because I wanted to ‘clap’ to turn off and on the light in my room! I have a small room for myself, so I basically have no other noise around. So, I was able to use an amplifier, which finds the value of the sound […]

Hi guys! So for my electronics class this year we were tasked with creating some kind of electronic gadget in order to demonstrate what we learned over the semester. Being a car-loving type of guy, I decided to get a cheap RC car and see in what ways I could hack it using an Arduino […]

Arduilay is an 8 channel AC relay box for use with Arduino, Max/MSP, Processing, etc.  I designed this system as an alternative to the USB>DMX 4 channel relay option.  While DMX gives you dimming control, the setup is easily 5 times as expensive as this simple relay box. Step 1: Get all the parts To […]

Sous-vide cooking is a great new way of cooking food. I will not explain why and how it works here… for great recipes and explanations, you can check out those guys : http://modernistcuisine.com/2013/01/why-cook-sous-… Unfortunately, a good (and I mean precise to the half °C) sous-vide machine is very very expensive (500, 1000$ or more). If […]

I started with the Instructable from Kyle Brinckerhoff; http://www.instructables.com/id/Ardu-pong-the-Arduino-based-pong-console/ Thanks Kyle! and the following at Make magazine http://blog.makezine.com/archive/2007/08/arduino-pong.html and I see the original code is attributed to Pete Lamonica Thanks Pete!! I am using the paddles instead of the joy stick and I have made it for 2 players. Also I added some sound. I […]

Demonstrates the advanced serial printing functions by generating a table of characters and their ASCII values in decimal, hexadecimal, octal, and binary. For more on ASCII, see asciitable.com Circuit image developed using Fritzing. For more circuit examples, see the Fritzing project page None, but the Arduino has to be connected to the computer. Code /* ASCII table Prints […]

Let’s make a simple inverted balancing robot, and operate it. You need only half a day to do them, if you have an arduino and some materials. [a video of a robot you would make] introduction: After a few work with arduino, I have thought of making an inverted pendulum. Then I had two policies […]

Thanks to: http://jeonlab.wordpress.com/ Since I have read an article on todbot blog, I bought a couple of Wii Nunchucks from ebay. I don’t remember how much I paid for them, but it was much cheaper than buying the accelerometer breakout boards. With the nunchuck data reading library shared by todbot (Thanks!), I could easily read the accelerometer data […]

A motion sensing soft-circuit interface. The following instructable will guide you through the construction of your own personalized Nama Instrument. I’d love to hear some feedback. Hope you like it and it serves you somehow! : ) Access http://www.viraseres.com/nama to download the project’s open source files and access the full description of the project. INTRODUCTION: […]

Wex detects your location with ultrasonic sensors then follows you with his one flashing eye.  His red “heartbeat” can be seen through his mouth. Step 1: Parts needed include: Arduino Two ping ultrasonic sensors Futaba s3103 servo Radio Shack 276-0016 7 color led Radio Shack  276-036 flashing red led 9 volt battery 480 ohm resistor […]