About: Ibrar Ayyub

The idea for this project came to me on the way to the trash. I was tasked with throwing away a box that has just been emptied of its original Ferrero Rocher sweetness content by my dear wife. This was shortly after the Valentine’s Day. So, I got to spend 10 seconds alone with this […]

In this tutorial you will learn how to communicate with a computer using a MAX3323 single channel RS-232 driver/receiver and a software serial connection on the Arduino. A general purpose software serial tutorial can be found here. Materials needed: Computer with a terminal program installed (ie. HyperTerminal or RealTerm on the PC, Zterm on Mac) […]

I just brought a new lamp and after a week, I’m tired of looking at it randomly change colours between red, blue, green. What can you expect from a cheap lamp brought at 5$ . Looking at the lamp I realized that I could make a Gmail lamp, that shines green every time I got […]

This article describes a simple spectrum analyser for the 2.4 to 2.5 GHz Wi-Fi band. It’s based on the Cypress CYWM6935 Wireless Radio Module. Although the manufacturer doesn’t recommend it for new commercial projects, it is still widely available from eBay suppliers and Farnell here in the UK. The module has 1 MHz channel spacing […]

My next door neighbors have recently been playing their music really loud so that I can hear it through the walls. I’ve gotten tired of having to bang on the walls each time to get them to quiet down, so I decided to automate some payback. The premise is that my device will listen for […]

A hideaway cat litter box is a great way to make your apartment look like a residence for adults instead of crazy cat ladies. A hidden litter box in a cabinet, under a sink, or built in to some other furniture does a lot for appearances, but what about the smell? Here’s how you can […]

I’ve built a number of projects that have interfaced the output of the Simple Bat Detector with a microprocessor. The most recent was the BatLogger II. But I hadn’t come up with an easy way for others to experiment with this idea … until now. My friend, Frank, in Germany, had wanted to make a […]

This instructable will tell you how to make and connect a soft potentiometer to a microcontroller, in particular we will connect it to a Lilypad Arduino. In our case soft potentiometer means a potentiometer made of a textile conductive ribbon. What you need: 1. soft conductive textile ribbon. The important thing here is that the […]

How to choose between ordering boards and low-risk home prototyping, with fabrication-file checks, inspection steps and authorized etchant waste handling.

In this Arduino UNO tutorial, we are going to use a Light Dependent Resistor (LDR) to create a simple childrens bedroom nightlight which turns on automatically when it gets dark and turns off when it gets light. An LDR’s resistance changes depending upon the amount of light hitting the sensor.  For the LDR we are […]