About: Ibrar Ayyub

Today is High Speed Photography day ! The concept is to take a ‘long’ exposure photograph, 4 seconds say, in a (very) dark room (a bathroom in our case). You end up with a completely black picture, right ? If you burst a flash (about a millisecond for a standard flash) then you get a […]

So what I want to do here is do several things with two LEDs with speech recognition I’m using bitvoicer you can get it here Step 1: Part List So I’m doing this with as little parts as I can, here’s the list: Green LED Red LED Breadboard 1k Resistor Jumper Cables Computer Computer Mic(you […]

In this section we will explain exactly how you can create your own Amblone setup, consisting of 3 RGB LED strips and an Arduino Mega. What do I need? To create the Amblone setup described in this guide, you will need the following: Amblone software An Arduino microcontroller, for example the Arduino Mega A USB […]

First and foremost, I must acknowledge that I am standing on the shoulders of giants, and that every giant is standing on the shoulders of giants (such as all contributors to instructables). If it weren’t for the unknowably many people who had the mindfulness to freely share information, this would have been utterly impossible; I […]

So my boss came to me one last week and said he wanted to scare the trick-or-treaters who came to his home, and the kids who would come to work during a special Halloween Walk the community does. Thus was born the talking pumpkin. In short, I used an Arduino, an SD card read/writer, and […]

I began this project with the objective of cheaply turning my RC helicopter into something of a UAV or at least to fit some sensors to reduce collisions and other “mis-haps.” Now unfortunately at the beginning of the project i miscalculated my little helicopter’s lift capabilities and so with the equipment fitted it has insufficient […]

Hello Everyone. This is my very first Instructable so please go easy on me. This was more or less a test project to see if my new arduino board worked. Any friendly advice will be greatly appreciated so my future posts can be even better. I am going to show you how to create the […]

Welcome to my FIRST instructable, i will show you how to connect a 16×2 lcd display to an arduino, follow these simple step by step instructions and you will have it done in no time 🙂   Tools Needed : Soldering Iron Wire Strippers Pliers Soldering Iron Flux ( Liquid Or Solid ) Soldering Iron […]

Hey, I am a big fan of Instructables. I have consistently used it for the past 3 years and now its time for me to write one myself.Here we go. This instructable is for those who want to make some inanimate object tweet automatically. Like say for example you are building a robot and you want the […]

What can you make with fluorescent acrylic as the inspiration?  We chose to make a glow-in-the-dark baby mobile, with an accompanying toy.  This project was completed as a part of the Computing and Craft class at Olin College of Engineering. Materials: – Craft Materials: – Fluorescent acrylic (1 square foot of each of the following […]