About: Ibrar Ayyub

Electronic Brick, Waterproof and other Versions NOTE: There are different-appearing versions but they work the same. This is an electronic thermometer which has high accuracy over a wide range (accurate to ±0.5°C over the range of -10°C to +85°C) (Workable from -55°C to +125°C). You can locate these thermometer chips up to 100M away from […]

If you are contemplating building your own machine, then you probably already know a good bit about how pinball machines work. It’s basically series of electro-mechanical events where a steel ball activates a switch, which in turn fires a solenoid that drives a mechanism, sending the ball off in some other direction where it most likely hits another switch, and so […]

I recently got my shipment of 10 buzzers I ordered about a month ago, so as soon as I got them I was eager to make something fun with them, so I looked around a bit and searched for what to do with them, and by spending some time on www.arduino,cc and posting lots of […]

I’ve been browsing this forum and the internet now for a couple of days and what I thought would be an easy side project turned into a (for me) quite complicated matter. I’m planning to build a mood light that consists of 12 common cathode rgb LEDs with each colour being controlled by an Arduino’s […]

Temperature and humidity measurement are always a nice addition to hobbyist projects. In my previous post, I’ve discussed the DHT11 sensor, which is capable of measuring both temperature and humidity. They are digital sensor and provide calibrated outputs with temperature and relative humidity. I’ve also demonstrated how to interface with Arduino and display it on […]

Nothing puts the fun back into coding like watching your very own creations come to life in the physical world. Luckily, with the current glut of high-tech toys and electronic gadgets on the market, it’s never been easier to experience the thrill of designing your own hardware by modifying what’s already available. A great way […]

Hello, I have plans to build myself a solar powered wireless Geiger counter using a RH Electronics Arduino IDE Geiger counter connected via a serial connection through a logic level converter to a 3.3V ATmega328P-AU Pro MCU with an ESP8266 serial WiFi tranceiver to send the readings from the Geiger counter to radmon.org.I intend to […]

Contents Aim To create a device that takes a users input and based upon that input play sounds. I want this ‘synthesiser’ to be simple to play, requiring little or no skill. Therefore, allowing the user to experiment with the sounds they are producing instantly as opposed to learning the technicalities of it first. Research […]

As mentioned on the Contents page, two different hardware platforms have been successfully used to support Mk2 PV Routers. [Update at 7/3/14:  Since writing this article, I have developed a new hardware platform which has been specifically designed  for this product.  The main board has an integral power supply and RF module, and there is […]

In this tutorial you will learn how to communicate with a computer using a MAX3323 single channel RS-232 driver/receiver and a software serial connection on the Arduino. A general purpose software serial tutorial can be found here. Materials needed: Computer with a terminal program installed (ie. HyperTerminal or RealTerm on the PC, Zterm on Mac) […]