Projects

ESP 01 1MB versionextreme left and 0.5MB versionextreme right

Iot Home Automation Using ESP-32 with Videos (Hindi & English)

Back in earlier days, when the word Internet of Things (IoT) was not a sound bite, developers of this field used various Wi-Fi shields to enable the Wi-Fi feature in their development boards. Following this, in 2014, the low-cost Wi-Fi enabled chip ESP-01 caught everyone’s attention. ESP-01 1MB version(extreme left) and 0.5MB version(extreme right) Espressif […]

Iot Home Automation Using ESP-32 with Videos (Hindi & English) Continue Reading

tmp image 0

MKR1000 Christmas IoTree with Cayenne Project Builder

Automate your Christmas tree and get notified when motion is detected around the tree! Things used in this project Hardware components Arduino MKR1000 × 2 PIR Motion Sensor (generic) × 1 Jumper wires (generic) × 1 Relay (generic) This is a really easy relay to use, plug and play! http://www.digital-loggers.com/iot.html × 2 Software apps and

MKR1000 Christmas IoTree with Cayenne Project Builder Continue Reading

mrk1000 ts

MKR1000 to ThingSpeak.com

A fairly simple project that attaches everyone’s favorite environmental monitor, the DHT, to the Arduino MKR1000 then transmits sensor data. Things used in this project Hardware components DHT11 Temperature & Humidity Sensor (4 pins) Arduino MKR1000 Story I had already developed code for the ESP8266 12-E to have environmental sensor data, taken by the DHT11,

MKR1000 to ThingSpeak.com Continue Reading

Authors prototype on the breadboard

Temperature Monitoring on Smartphone

This article describes a temperature monitoring system on an Android smartphone. Temperature is sensed by a temperature sensor installed in the circuit and is sent over Bluetooth to the smartphone. An Android application is used in the smartphone to display temperature data. The system provides easy monitoring of process data on a smartphone. You can

Temperature Monitoring on Smartphone Continue Reading

en_USEnglish
Scroll to Top