Today I’m gonna make 3D Printed Unicorn Horn. I saw and did the project in Adafruit’s website about a year ago but I could not find an opportunity to share it. It looks great when going out to the party and especially in the evenings. 🙂 I got the horn out of the 3D printer […]
Unicorn Horn With NeoPixel LEDs & Arduino Lilypad Continue Reading
This interactive wall art piece is approximately 39″ tall and 24″ wide. I laser cut the wood at Clemson University’s Student Makerspace, then I hand-painted all the triangles and installed the lights on the back of it. This instructable will walk through how I made this exact piece, hopefully the concept of it will inspire
Low-Poly Iron Man With Wifi-Controlled LED Strips Continue Reading
People in the western world spend a lot of time sitting. At the desk, driving around, watching TV and more. Sometimes, sitting too much can harm your body and harm your focusing abilities. Walking and standing up after a given time is crucial to perform better in life. As students we spend a lot of
Study Better With a Smart Desk Lamp – IDC2018IOT Continue Reading
What if I told you that you could build a display out of shoe laces!? Well that is exactly what I’ve done! Building your own seven segment display is nothing new, it’s a very common Arduino project, but I had an idea for this one so I said I’d give it a go, and I
I made a Sunlight simulating lightbox with a mountain village skyline, that I might upgrade to a wake-up light some time, for a school project. Step 1: Get the Supplies Supplies I used: -Arduino UNO -Neopixel ledstrip 1m, 30 leds(DC5V-W2812) -3 jumper wires -USB cable type B -5V power adapter -Aluminum tape(or aluminum foil) -4mm
LEDs are designed to emit light, but they also make surprisingly capable sensors. Using only an Arduino UNO, an LED and a resistor, we will build a hot LED anemometer that measures wind speed, and turns off the LED for 2 seconds when it detects you are blowing on it. You can use this to
If you’ve even seen a fake candle you have probably noticed how it doesn’t look realistic. Whether you’re trying to add some atmosphere to a dinner or light up a jack’o-lantern, your choices are limited. A real candle has a fire hazard, but a fake candle will look tacky. If only there were a safe
In this project, I’ll show you how to make your own 8×16 RGB LED Matrix using Arduino Uno/ Nano. An LED Matrix can show scrolling messages, display animations, music spectrum analyzer … With integrating NodeMCU, it can be used as small screen to show weather information from internet or any process values when it connect
Charlieplexing. Aside from being a fancy word it is a technique for driving multiple LEDs with relatively few pins on a microcontroller. It allows you to drive N*(N-1) LEDs with just N pins without requiring any additional hardware, making it a quick, cheap and easy way to add multiple LEDs to your arduino projects. Throughout
Charlieplexing Made Easy (and What It Even Means?!) Continue Reading
Hello there! Fellow electronics enthusiasts, I am quite sure we all make some or other projects, as a part of our learning experience or academics. We sure would want to display some data present on our micro-controllers, from sensors or simply display some message, so here is a quick tutorial about OLED displays, in which we
English 
French