IDTF1150 Dual RF to IF Downconverting Mixer The F1150 dual channel device is designed to operate with a single 5V supply. It is optimized for operation in a Multi-mode, Multi-carrier BaseStation Receiver for RF bands from 1700 – 2200 MHz with High Side Injection. IF frequencies from 50 to 450 MHz are supported. Nominally, the […]
RF mixers reduce distortion in 4G basestations Continue Reading
who would ever imagine that global cultural and economic revolution would spring from the tranquil fields of piedmont, italy, in tiny towns nestled against the stunning backdrop of the alps? but that’s exactly where arduino, the system of microcontrollers revolutionzing the maker movement and pioneering the concept of opensource hardware, was born in 2005 and continues
arduino factory + production tour in turin, italy Continue Reading
The ADXL346 is a small, thin, ultralow power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either an SPI (3- or 4-wire) or I2C® digital interface. The ADXL346 is well suited for mobile device applications. It measures the
Tired of digging through the collection of credit, debit and loyalty cards in your wallet? Well, if you are, then you’re the sort of person who might like the Plastc Card. It’s a new electronic card-format device, that can store the information for up to 20 other cards on it at once. You just select
This Sumo Bot was designed, built, programmed and tested over a 12 week period for one of my final year engineering classes. The aim was to design and build a lightweight fully autonomous sumo fighting robot for an in class Sumo Bot competition. The robot was required to push, lift or flip the opponent’s robot out
Autonomous Sumo Combat Robot with Pneumatic Flipper – How to Continue Reading
A full featured, compact embedded computer with optional 2.8″ touch LCD and DIN-mountable enclosure that measures 2.4″ by 3.6″ by 1.7″. It packs in industry standard interfaces including Ethernet, USB, RS-232, RS-485, and CAN, and bunch of I/0. Make It Smaller Time and again at customer visits, Technologic Systems heard the same thing, “We love
TS-7100 – FEATURE DENSE EMBEDDED SOLUTION WITH OPTIONAL 2.8″ TOUCH SCREEN Continue Reading
You just need to install your Arduino with the GPRS+GPS Quadband Module (SIM908) in a hidden place in your car, maybe in your trunk, in the glove compartment or under your spare tyre. Then connect the GPRS-GSM and the GPS antenna and a SIM card, all of this powered with a battery and… you are
Realtime GPS+GPRS tracking of vehicles using Arduino Continue Reading
Low-Power 2.4GHz ISM Transceiver for Consumer Applications The Atmel AT86RF232 2.4GHz ISM transceiver is fully IEEE 802.15.4-compliant and feature-optimized for consumer applications in the unlicensed 2.4GHz ISM band available worldwide. It is ideal for low-complexity, peer-to-peer wireless applications like remote controls, health and fitness devices, toys, game controllers, and others. The new device is fully-compliant
The NanoPi R2S, which was recently launched by FriendlyElec back in January of this year, was an upgrade to the NanoPi R1S. At the time of the Nano Pi R2S publication, the board wasn’t available, and there wasn’t any information about the pricing either. As of now, FriendlyElec has fully launched the NanoPi R2S and is available for purchase starting from
FRIENDLYELEC NANOPI R2S IS NOW AVAILABLE FOR PURCHASE FROM $22 Continue Reading
Flex Power Modules’ converters are first generation direct conversion products Flex Power Modules’ BMR481 DC/DC converter addresses the growing need for higher energy efficiency levels in datacenters and cloud computing infrastructures. This converter offers an input range of 40 V to 60 V targeting 48 V to 54 V nominal supplies and a programmable 0.5 V to 1.35 V output. The 12 mm
BMR481 48 V-TO-LOAD DIRECT CONVERSION DC/DC CONVERTERS Continue Reading
English 
French