News & Updates

Chip has all analogue for engine management

Chip has all analogue for engine management

The 33813 is an engine control analog power IC intended for one cylinder motorcycle and other small engine control applications. The IC consists of five integrated low side drivers, two pre-drivers, a VRS (variable reluctance sensor) input circuit, a voltage pre-regulator using an external pass transistor, and two 5.0 volt internal regulators, one for the […]

Chip has all analogue for engine management Read More »

ADI aims ECG chip at consumer health monitors

ADI aims ECG chip at consumer health monitors

The AD8232 is an integrated signal conditioning block for ECG and other biopotential measurement applications. It is designed to extract, amplify, and filter small biopotential signals in the presence of noisy conditions, such as those created by motion or remote electrode placement. This design allows for an ultralow power analog-to-digital converter (ADC) or an embedded

ADI aims ECG chip at consumer health monitors Read More »

TI chip combines body analysis in weighing scales 1

TI chip combines body analysis in weighing scales

Description The AFE4300 is a low-cost analog front-end incorporating two separate signal chains: one chain for weight-scale (WS) measurement and the other for body composition measurement (BCM) analysis. A 16-bit, 860-SPS analog-to-digital converter (ADC) is multiplexed between both chains. The weight measurement chain includes an instrumentation amplifier (INA) with the gain set by an external

TI chip combines body analysis in weighing scales Read More »

NORDICS NRF52832 WL CSP SOC PROVIDES PROCESSING POWER AND MULTIPROTOCOL SUPPORT FOR TUNDRA LABS TL448K6D VR MODULE

NORDIC’S NRF52832 WL-CSP SOC PROVIDES PROCESSING POWER AND MULTIPROTOCOL SUPPORT FOR TUNDRA LABS’ TL448K6D-VR MODULE

Nordic Semiconductor today announces that Tundra Labs, a Green Bay, WI-based technology company, has selected Nordic’s nRF52832 multiprotocol System-on-Chip (SoC) for its ‘TL448K6D-VR module’. The TL448K6D-VR module assists developers to simplify and lower the cost of designing six-degrees-of-freedom (6DoF) tracked devices for Valve’s SteamVR gaming platform. The highly integrated module employs the 3.0 by 3.2mm

NORDIC’S NRF52832 WL-CSP SOC PROVIDES PROCESSING POWER AND MULTIPROTOCOL SUPPORT FOR TUNDRA LABS’ TL448K6D-VR MODULE Read More »

IWAVE OBD II SECURED EDGE ANALYTICS ENABLING IOT IN FLEET MANAGEMENT

IWAVE OBD II SECURED EDGE ANALYTICS ENABLING IOT IN FLEET MANAGEMENT

Everyone desires to own a vehicle, but the business of leading a fleet of vehicles is never an easy task. From the safety of the fleet, route optimizing, trip analysis to timely maintenance, fleet owners have a lot in their hands to deal with regularly. With the ever-increasing prices of vehicles and fuel, enterprises are

IWAVE OBD II SECURED EDGE ANALYTICS ENABLING IOT IN FLEET MANAGEMENT Read More »

AAEON BOXER 8120AI AI MONITORING FOR FEVER AND PPE COMPLIANCE

AAEON BOXER-8120AI: AI MONITORING FOR FEVER AND PPE COMPLIANCE

In light of the ongoing pandemic, nations around the world are putting into place various practices to help curtail the spread of COVID-19. One common rule among these is the requirement to wear masks or personal protective equipment (PPE) out in public, as well as barring anyone with a fever. However, observing large numbers of

AAEON BOXER-8120AI: AI MONITORING FOR FEVER AND PPE COMPLIANCE Read More »

ARM Cortex M3 plus 24bit DACs for 4 20mA loops

ARM Cortex M3 plus 24bit DACs for 4-20mA loops

The ADuCM360 is a fully integrated, 3.9 kSPS, 24-bit data acquisition system that incorporates dual high performance, multichannel sigma-delta (Σ-Δ) analog-to-digital converters (ADCs), a 32-bit ARM Cortex™-M3 processor, and Flash/EE memory on a single chip. The ADuCM360 is designed for direct interfacing to external precision sensors in both wired and battery-powered applications. The ADuCM361 contains

ARM Cortex M3 plus 24bit DACs for 4-20mA loops Read More »

TRINAMIC INTRODUCES THE TMCM 1617 SERVO CONTROLLER MODULE

TRINAMIC INTRODUCES THE TMCM-1617 SERVO CONTROLLER MODULE

TRINAMIC Motion Control GmbH & Co. KG  announced the TMCM-1617 single-axis servo controller module designed for servo drives with 18A RMS and 8 to 28V DC supply voltage. Achieving high-current loop frequencies to minimize current ripple, the potted module enables smaller electric drives with high dynamics, according to the company. The TMCM-1617 also supports a range of encoders for

TRINAMIC INTRODUCES THE TMCM-1617 SERVO CONTROLLER MODULE Read More »

Scroll to Top