The Arduino Motor Shield allows you to easily control motor direction and speed using an Arduino. By allowing you to simply address Arduino pins, it makes it very simple to incorporate a motor into your project. It also allows you to be able to power a motor with a separate power supply of up to […]
Today, I’m going to show you how to make an Arduino motor shield (driver) at a low cost. It works splendidly, its posses almost all the characteristics of the original Arduino motor shield. It’s almost considered as a clone. The original Arduino motor shield has the same motor driver chip (L298), the only difference with it,
Today, I constructed a compact 3x3x3 LED cube utilizing an ATtiny2313 that I acquired around 2 weeks ago. Every time I wanted to update the LED cube with better patterns, I had to bring out my breadboard, reconnect everything following ATtiny2313 pin-outs, and upload the updated code. I proceeded to search on eBay and Amazon
Good news for users of the The Arduino GIGA R1 WiFi board: you can now add a nice touch display to your board with minimum effort thanks to the brand-new Arduino GIGA Display Shield. It provides a 3.97” RGB touch screen with 480 × 800 pixels and capable of producing 16.7 million colors. The touch screen is
Arduino GIGA Display Shield Has Microphone, IMU and Supports Multitouch Continue Reading
We are excited to announce that the new Arduino GSM Shield is ready to be shipped allowing Arduino boards (Uno, MEGA and Leonardo) to explore the wonders of adding a GPRS/GSM connection to interactive projects. We teamed up with Telefónica Digital to design a tool that is greatly simplifying the process of building Internet of
Dive into the Internet-of-Things world with the new Arduino GSM Shield Continue Reading
The Boot Bot Shield lets you burn the arduino boootloader onto a blank Atmega 328 chip. The bootloader is that magic piece of software that turns a mundane chip into the open source programmable miracle known as the arduino. Blank chips cost a few dollars less per chip than bootloaded ones. With the Boot Bot
Have you ever wanted to impress your friends by saying something crazy like, “I think there’s going to be an earthquake soon” moments before an earthquake hits? Or do you just want some warning, a few seconds that could save your life. This project will allow you to hook up a seismic sensor to a
Arduino Seismic Activity Monitor – Ethernet Shield Continue Reading
Hi. I’ve just got myself an Arduino Uno R3 and I’m really new in the world of Arduinos. There’s so much to learn and explore 🙂 One of the first shields that I’m tempted to buy is the Prototype Shield. I think building a prototype circuit right on top of the Arduino is pretty slick.
In this short tutorial we make an Arduino LCD shield. Updated 18/03/2013 Today we are going to make an Arduino shield with an LCD module. More often than not I have needed to use an LCD shield in one of my projects, or with the Arduino tutorials. Naturally you can buy a pre-made one, however
Today we are going to make a real time clock Arduino shield. Doing so will give you a simple way of adding … real time capability to your projects such as time, date, alarms and so on. We will use the inexpensive Maxim DS1307 real-time clock IC. First of all, we need create our circuit
English 
French