I’m setting up a betta fish tank and wanted to make an automatic fish feeder so he never misses a meal. I’ve seen other DIY fish feeders that just shake a container but I wanted to be able to precisely control how much food he’ll get. Hope the new fishy likes it! Follow my other […]
Robotic fish is a biomimicking of a real-world fish being developed with a view to enable surface level cleaning of water bodies. Introduction Robotic fish is a biomimicking of a real-world fish being developed with a view to enable surface level cleaning of water bodies. The fish monitors the pH levels of the water that
PATROL FISH TO COLLECT AND CHECK THE CONTAMINATION OF A WATER BODY Continue Reading
Introduction / Why this project In 2016 I build my first fish feeder, see Fish Feeder 1. The feeder worked fine for more then half a year. After that period the servos were worn out, causing the program to halt, without sending an error-mail. Oops. I didn’t had the time to correct this fault, because the aquarium
Step 1: Prepare Your Materials For this project, you will need the following materials: For the circuit: 3 pieces of Insulated copper wire (22AWG wire) around 4-6 inches long, stripped on both ends AC/DC Adaptor GWS Mini Servo Double Side Servo arm Servo screw (1.7 x 3mm) Arduino USB Cable A to B For building
Assembly instructions for an add-on board for the Arduino. **** FOR INSTRUCTIONS FOR MARCH 2013, KICKSTARTER PROJECT GO HERE http://www.instructables.com/id/Blinky-Fish-Kickstarter-Project/ ************ It has some LED’s and a button. It connects to digital pins 9-13 and ground. My hope is that this will be useful to people that want to play with writing code for the Arduino, but don’t want
English 
French