Today I’m going to present some of more advanced capabilities of ADC built in ATSAM3X8E – the heart of Arduino Due. I like the Arduino platform. It makes using complex microcontrollers much simpler and faster. Lets take for example the analog-to-digital converter. To configure it even on Atmega328 (Arduino Uno/Duemilanove) you must understand and set […]
Playing with analog-to-digital converter on Arduino Due Continue Reading
I have loved making projects with Arduinos, but at $30 a piece your projects can get expensive. So I want to show you how you can make your own Arduino from scratch and save money doing it. Make your own Arduino for around $8. For this instructable I show you how to make one on
For some strange reason I have a fascination with various types of electronic clocks (which explains this article). Therefore this project will be the start of an irregular series of clock projects whose goal will be easy to follow and produce interesting results. Our “Clock One” will use a Freetronics Dot Matrix Display board as
Clock One – Digital plus Analog Clock An Arduino Continue Reading
This a guide for an Arduino version, but I am working on a mini ATtiny84 version. Once I get that working, I will post another Instructable on how to make it. I’m sure you could make this same thermometer with an LM35 also, if that’s what you have, and you probably won’t have to modify
This instructable will show you how to create a multifunction platform with a thermometer, chronograph (count up timer), count down timer, and light display. It is also intended to be a platform for other analog sensors or any other functions you can think of. Multifunction_Digital_Thermometer.zip71 KB Step 1: Gather Materials To build the digital thermometer
Multifunction Digital Thermometer using an Arduino Continue Reading
This is basic for your arduino projects, input switch read from digital input. When ever switch pressed, LED will turn on. Instruction; 1) Connect cathode lead of LED (shorter lead) to ground pin and anode lead of LED (longer lead) to pin 13. 2) Add switch to breadboard, connect one of the switch
This is my second instructable. I just had a mood of making a digital watch. But wanted to make it a learning process. I already had a sanguino i could have easily used that Atmega644 chip. it would have been more than enough. But i wanted to try burning a Arduino bootloader and see if
Arduino 7 segment Displays Digital Clock With Charlieplexing LEDs Continue Reading
In some point in the life of every electronics hobbyist the need to make a clock is borned, in my case it was about a month after I soldered my first part on a board, but back then I didn’t have the right tools, parts and knowledge to do such a thing. But after about 2
Make A Digital Clock From Scratch using arduino Continue Reading
English 
French