Not only this project has all the Smart Home features but it also includes MYO gesture control, allowing control of lights with your arm. Things used in this project Hardware components Myo Gesture Control Armband Armband used to detect arm gestures and control different hardwares in the house × 1 Arduino MKR1000 Arduino used to […]
The smart insole collects foot pressure data in real-time. Through Thinger.io the information is fed into a system that visualizes the data. Things used in this project Hardware components Arduino MKR1000 × 1 Force Sensitive Resistor I’ve used Interlink model 402 × 3 OpenBuilds Wire Cable – By the Foot × 1 Resistor 10k ohm
A DIY Smart Insole to Check Your Pressure Distribution Continue Reading
In this article, we are going to control two motors by using the GY-521 accelerometer module. The speed of the motor will increase or decrease upon moving the GY-521 module up or down. On moving the Gy-521 towards the downside, the speed of the first motor will decrease and the speed of the other motor
DC Motor Speed Control using GY 521 Gyro/Accelerometer and Arduino Continue Reading
AIR Mouse is also called gesture-controlled mouse and it works based on hand gesture. In this project an accelerometer is used for measuring the tilt of hand in X and Y direction and moves the cursor according the tilt. In the project two types of circuit are used, one is the transmitter circuit and other
Project: Gesture Controlled Mouse (Air Mouse) Using Arduino & Accelerometer Continue Reading
The idea here is to build a wearable virtual guitar that is to be controlled with two hands much like playing Air Guitar. It has been created and prototyped during a two weeks project at ChalmersUniversity (Sweden) for a Physical Computing class. The aim is to get the feeling of playing a real guitar. The
How to Build an Air Guitar With Arduino, Aka the AIRduino Guitar Continue Reading
Camera trigger powered by Arduino MKR1000 and controlled by the app. Let the algorithm take the best shots. Things used in this project Hardware components Arduino MKR1000 Any board with WiFi and support for Firmata protocol will work × 1 Servos (Tower Pro MG996R) × 1 Microsoft Windows Phone × 1 Software apps and online
Description Recently I bought two ESP12e, wanted to see how those IoT things work. One thing I know for sure, they don’t tolerate 12V 1A 😉 yep fired one by accident … I left with one working, trying to figure out what should I build with it. In the meantime was wondering should I by
ESP12e + OLED display – a try to make a smartwatch Continue Reading
It can be too easy to get stuck overthinking your ideas and letting your gears grind without making any progress. As makers, designers, engineers, hobbyists, etc. it is crucial for us to get out of our heads and sketch out our ideas as they come. It takes practice, but ultimately the more we sketch, the
transmission: A Creativity Measurement System Continue Reading
In this article, we are going to interface the GY-521 accelerometer with Arduino. The GY-521 has an InvenSense MPU6050 chip which contains a 3-axis accelerometer and a 3-axis gyro meter. This makes it a 6 DOF IMU (6 degrees of freedom inertial measurement unit). The chip also includes a 16-bit analog to digital converter on each
Most of industrial robots are still programmed using the typical teaching process, through the use of the robot teach pendant. In this paper is proposed an accelerometer-based system to control an industrial robot using two low-cost and small 3-axis wireless accelerometers. These accelerometers are attached to the human arms, capturing its behavior (gestures and postures).
English 
French