In this Instructable, I’ll show you how I managed to create my own I2C controlled device that I can then connect to any microcontroller and interact with it over I2C. In my case, I’m using it to control an AC dimmer module from a separate Arduino Nano and I then interact with it from another […]
Custom I2C Slave Sensor/device With Arduino Continue Reading
Hi every one, here Chris, and I want to show you how I made my own Arduino AC dimmer that can control AC loads such as motors and lights easily. It has the power to handle 1200+ Watts and It’s a very nice project for domotics and home automation because the microcontroller I used is
Make Your Own Arduino AC Dimmer | Drive Motors & Lights Continue Reading
Green wire is zero_cross signal, goes to Arduino digital pin 2 in. Yellow wire is light dimming signal, comes from Arduino digital pin 11. The LED on board should dim or fade along with the AC light source. Fading will not work until AC power is connected, it depends on the zero-cross info from the
English 
French