This is my homemade Dual H-Bridge using the IC L298N. For control DC motors or step Motors ao other purposes just like you need. Breakout L298N.ppt1 MB Step 1: Hardware and Materials COMPONENTS: 1 x perf board 13×26 holes (3,5 x 7,0 cm) 2 x AK300/3 connector 1 x 8 Header female connector for Arduino […]
Homemade Dual H-Bridge – L298 Breakout Board using Arduino Continue Reading
Yes, I know this has been done before, but I wanted to build my own, using as few parts as possible. I built this as a table top or wall mount model, but it can be scaled up to make a coffee table. I built it as a study for a more ambitious project, which
Daft Punk Coffee Table 5×5 LED Matrix using an Arduino Continue Reading
I love to integrate devices which are not supposed to be integrated and this guide shows you how you can control an Android mobile using Apple’s Remote. (Who said Apple devices work only with Apple products 😉 ) Also this is my entry to the Sparkfun microcontroller context. If you like this guide, please do
Control Android mobile by an Apple Remote using Arduino Continue Reading
Please vote for this Instructable if you think it deserves it! Thanks! The Ultimate Altimeter is a super-compact, Arduino controlled altimeter capable of measuring the altitude with an accuracy of 0.3 meters, and saving the highest and lowest values it has measured. It is powered by a 40 mAh Lithium Polymer battery, uses a tiny
Has this ever happened to you? You wake up in the morning and realize that you’re terribly late for work/class/your weekly pedicure/whatever. You throw on a t-shirt and flip flops, sprint around your warm, heated house grabbing your belongings, and race out the door…where you suddenly find yourself surrounded by a cold, biting wind encompassing
Arduino text‘in. Key Features: 24 relays controlled by 4 I/O lines! Cell phone text using your Arduino. This project hacks a cell phone to text using normally open relays. After investigating cellular modules on the internet I decided it looks not only rather pricy, but also like a possibility that even after I had it
This drawing will display RF power and SWR readings from any SWR bridge, such as the ‘monimatch’ type. Since this type of bridge, called ‘monimatch,’ varies with frequency, the meter needs to be adjusted for each bandwidth. My main focus was on VHF/UHF/SHF, so I had planned for 6m, 4m, 2m, 70 cm, 23cm, and
Arduino text‘in. Key Features: 24 relays controlled by 4 I/O lines! Cell phone text using your Arduino. This project hacks a cell phone to text using normally open relays. After investigating cellular modules on the internet I decided it looks not only rather pricy, but also like a possibility that even after I had it
I’ve just completed my second Arduino project, a sound level detector which sets off an “alarm” when there’s the sound level is to high for too long. I built it for use in a school that wants to provide visual feedback to students when they are being too loud. The “alarm” is a string of
This sketch demonstrates Internet-based remote communication using a companion ‘bridge’ program running on the attached host which sends and receives messages via an online MQTT server. This allows connecting one Arduino to another over arbitrary distances, which we can use as a starting point for building collaborative telepresence. Full Source Code The full code is
English 
French