This is a creative cylindrical LED cube with proximity sensing by infrared led and photo-transistors. Interactive Cylindrical Cube includes: 8X8 royal blue LEDs, 12 infrared LEDs, 16 photo-transistors and all of them are bent & formed a cylindrical shape. Please see video below when this interactive cylindrical cube is used as flowerpot. Step 1: Bill […]
In this instructable / video I will guide you with step by step instructions how to make scrolling text display with Arduino.I won’t be explaining how to make code for Arduino, I will show you how to use existing code. What and where you need to connect and install that you could make scrolling text
Hi, in this instructable you will learn how to build a very long lasting LED-Matrix-Candle. It looks very modern, doesn’t smoke 😉 and can be reloaded with your smartphonecharger. The yellow light gives you a very good expression of a real flame. To be exact: it is a video of a real flame which is
Original glowing ornament for your Xmas tree. It’s made from brass rods wired by a freeform method and contains 18 glowing LEDs. Step 1: Tools soldering iron solder soldering paste 0.8mm brass rod 18x SMD LED coin battery on/off switch Step 2: The Rings The main challenge here is to create a round shape from
Turn your NES controller’s START BUTTON into an ON/OFF switch for lights with this Instructable – Other versions I have seen either gut or modify the electronics but in this project the electronics are intact so the controller can be used for retro gaming after the lights go out… I used an LED for the light in this Instructable because
Use Your NES Controller As On/Off Switch for Lights. Continue Reading
This example example uses the Arduino board to receive data from the computer. The Arduino boards turns on an LED when it receives the character ‘H’, and turns off the LED when it receives the character ‘L’. The data can be sent from the Arduino serial monitor, or another program like Processing (see code below),
mo.momi Led strips are amazing! Firewalker-led-sneakers(http://learn.adafruit.com/firewalker-led-sneakers) by Adafruit inspired me. I wanna change a way to control it, instead of “pressure-sensitive”, I use a accelerometer sensor judging the motion of slipper. It’s simple, I complete this version only calculating the acceleration on “z” axis, weather i’m speed up or slow down. Led will “flow” if
This sketch blinks the Esplora’s RGB LED. It goes through all three primary colors (red, green, blue), then it combines them for secondary colors(yellow, cyan, magenta), then it turns on all the colors to create white. For best results, cover the LED with a piece of white paper to see the colors blend. Circuit Only
Have you ever wanted to turn the lights ON or OFF just by thinking about it? Or do you want to know how stressed you are by looking at the color of a RGB led? While now you can by following this Instructables! To get a feeling for what we are going to make today
WhatThis button pad is made using a PCB and other components manufactured by Sparkfun. It is driven by an Arduino Mega. Each button is nice and squishy and satisfying to press, and it has an RGB LED inside! I’ve been using it to control animations I’ve coded in Processing. The button pad sends a message
Arduino LED Button Pad That Drives Processing Animations Continue Reading
English 
French