In this tutorial learn how to make your own backlit-LCD Arduino shield. Let’s see how simple it is to make your own Arduino LCD shield. Sure – you can just buy one, but where’s the fun in that? Getting Started Our LCD is a two line, sixteen character backlit LCD. It has a typical HD44780-compatible […]
I acquired an old fax machine that looked like a ripe source of parts, like steppers, IR sensors, micro switches and things. As it turned out, it was. It also had a nice looking 2 x 16 character LCD. However, after taking everything apart, I found the LCD only had 13 pins instead of the
Salvaging an LCD from a fax machine using an Arduino Continue Reading
So I had some luck with getting the Sharp Infrared range finder working and I’ve now plugged this on to my servo rig to see if I get better results on my radar styled display. Check out how to use the Sharp IR range finder here Few things to bare in mind, whilst the code
This is where all the work is done to read an interpret the values from the servo and the sensor. If the readings are to erratic then you won’t have nice shapes. Also if you don’t allow enough time to the signals to be sent back then you’ll get false distance readings. So this code
First things first, we need to build our circuit. This is the easy bit! We’ll be using the Arduino to control a servo that will rotate our sensor around 180 degrees. The Arduino will then send the value from the distance sensor along with the current angle of the servo to the serial port. Before
I’ve gotten hold of what I assumed was a compatible 16×2 LCD screen with my Arduino board – it’s a Powertip PC1602F and uses a compatible display driver for the Hitachi HD44780 display chip. This is essentially what the Arduino LCD libraries are built around, so when I failed to get a display this is
ENGLISH VERSION HERE Dans ce programme nous allons voir comment capter une température et afficher sa valeur sur un lecteur LCD en choisissant si on veut l’afficher en°C ou °F grâce à une télécommande infrarouge. Dans ce tuto j’utilise: -Une carte SainSmart (similaire à Arduino UNO) -Un lecteur LCD QC1602A -Un variateur -Un capteur de
Capteur temperature choix du type de degres par infrarouge using arduino Continue Reading
This game is a homage to Ariadne, the maze-generator from Inception 🙂 If you haven’t seen the movie yet – watch this video again after you do (you can also watch it now – it’s not a spoiler, it’s just funnier for inception-vets). The nice thing about it is that it’s a 1st-person game, so when you
Ariadne – a 1st person maze on a 16×2 LCD using Arduino Continue Reading
Ever have trouble programming code for seven segment displays? Well they made the 4511 to make things a whole lot easier. What the 4511 does is takes a 4 digit binary input value (ones and zeros), and converts it to a decimal value on a seven segment display, it’s a really handy chip. In this
Arduino: an easier way to work with seven segment displays Continue Reading
Want to be able to control a couple of servos with a thumb-joystick? But don’t know where to start? I don’t have servos, but I can put you on the right track on how to do stuff when you move the thumbstick around. This instructable will teach you how to output the direction of the
Arduino Joystick Breadboard with LCD Output Continue Reading
English 
French