XBee Shield v1.1




XBee Shield v1.1 description:

The XBee shield allows an Arduino to communicate wirelessly using Zigbee. It is based on the XBee module from MaxStream. The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight). It can be used as a serial/usb replacement or you can put it into a command mode and configure it for a variety of broadcast and mesh networking options.

XBee Shield v1.1




XBee Shield v1.1 specification:

 

XBee Shield v1.1 pinout:

XBee Shield v1.1Note:
The XBee module is a serial device and communicates using software serial on D11 and D12.

 

For more detail: XBee Shield v1.1




This Post / Project can also be found using search terms:

  • ArduinoxBee v1 1 shield
READ  DOGM128 Shield

Leave a Comment

*
= 3 + 0

(Spamcheck Enabled)

Read previous post:
Wiznet Ethernet Shield

Wiznet Ethernet Shield description: Ethernet shield based on the Wiznet W5100 ethernet chip. Compatible with official Arduino Ethernet library and...

Close
Scroll to top