Triple-Wide Extender Shield

Triple-Wide Extender Shield description:

Plug in an Arduino to the underside and it replicates all of the pins in three locations so you can istall multiple shields side-by-side. The pin replicators keep everything connected.

Triple-Wide Extender Shield

Triple-Wide Extender Shield specification:

  • 6.3in tall x 2.7in wide
  • 162mm tall x 69mm wide
  • Arduino and Illuminato replicated mounting holes
  • Arduino and Illuminato replicated plated through-holes
  • Solderable dev area

Triple-Wide Extender Shield pinout:

Triple-Wide Extender ShieldNote:
No pins used by the shield itself. All pins are connected through for other shields to use.


For more detail: Triple-Wide Extender Shield

READ  Robot shield for Arduino Board

Leave a Comment

= 4 + 9

(Spamcheck Enabled)

Read previous post:
Triangle Extenders

Triangle Extenders description: Triangular shaped wedges to rotate other shields 45 degrees off the Arduino. Triangle Extenders specification: 1.77×1.15 inches...

Scroll to top