Power over Ethernet Flashlight
Sometimes you learn about an interesting IC and you build an entire circuit around it for no other good reason… This project is one of those!
The TPS2378 is an IEEE802.3at (Power over Ethernet) Powered Device controller, featuring internal pass MOSFET for loads up to 25.5W, Type 1 (a.k.a. 802.3af) compatibility and auxiliary power source support.
The IC is normally used together with a DC-DC step down regulator to power a network device (the PD) from a PoE compliant switch or injector (the PSE). A proper 802.3at device requires an isolated power supply with some safety characteristics that makes it not trivial to implement, and there are many DC-DC ICs with integrated PoE controller to make it easier, but as I wasn’t really interested in that part I just went for an easier project with just the PoE controller and some ballast… And what better ballast than some high power white LEDs!
This project is a small PoE flashlight, that can be powered by any 802.3af or 802.3at compliant injector or switch. It can be used as a PoE tester, or if you get trapped in a dark datacenter at night!
TPS2378 PoE Controller
The TPS2378 is a feature rich device, and can be used in different configurations depending on product needs. The typical application (from the device official datasheet) shows the device with some basic external elements, including the circuit for an alternative power source.
For more detail: Power over Ethernet Flashlight
JLCPCB – Prototype 10 PCBs for $2 (For Any Color)
China’s Largest PCB Prototype Enterprise, 600,000+ Customers & 10,000+ Online Orders Daily
How to Get PCB Cash Coupon from JLCPCB: https://bit.ly/2GMCH9w
This Post / Project can also be found using search terms:
- power over ethernet based projects