When it comes to electronics projects, Arduino is definitely one of the most favorite choices of every enthusiast, and if you are Arduino fan like me, you too build all your projects on Arduino, so what if you have limited boards available to use? And really for small projects, using Arduino boards isn’t a good […]
This project is to make two infrared fighting tanks with Starter Robot Kits, some mechanical parts and electric modules. They are controlled with 2.4G wireless joystick. So, how to make it? Step 1: Parts Required 2 x Starter Robot Kit(Bluetooth or IR version) 4 x Beam0808-136-Blue 2 x Beam0808-024-Blue 2 x Beam0824-032-Blue 2 x Beam0808-312-Blue 2 x Me USB Host 2 x Me
These 6 easy steps will tell you how to make a wooden claw machine controlled with Arduino. Step 1: Print All of Your Pieces Either handcut or laser cut all of your pieces Step 2: Aquire Your Parts You will need 4 SG90 servos, 4 Potentiometers, and a box of half inch nuts and screws.
Every job has it’s routine. I am a software developer who works with a Git/Maven based workspace everyday. So when I start working, my daily routine is to update and build my local workspace, pulling changes from GitHub, execute a maven build and execute the updated software. Usually I get my first coffee after that,
Le Maven de la Boîte: un Contrôleur Arduino pour les Développeurs de Logiciels Continue Reading
Whoa? Turn any EL (Electro-Luminescient) material into a touch sensor with no additional hardware. It’s an open prototyping platform for wearable electronics! Open source and Arduino IDE compatible. There are many different EL materials, including EL paint, EL panels, EL tape, EL wire. They have been integrated into a variety of applications, from motorcycle jackets, to
Whoa Board: Dream With Touch Sensing EL Wire, Panels, Paint Continue Reading
Hi there. This is my first instructable, so I hope you will be patient with me if I make any mistakes setting it up.It is written for beginners like myself, so the more advanced among you can skip a lot of this and just get to wiring it up. The goal I set myself was
Control servo motors with potentiometers and Arduino Continue Reading
ou, who are at production of electronic devices, know, how important is a choice of a suitable solder. A designer of a given device might not focus on a solder used at soldering of the first protoype, bu tin a production it will manifest itself – sooner or later. Not that some solder would be
Kristall 511 solder wire won´t dirt your PCB Continue Reading
I came across a stash of iButton T-sense 1-wire sensors.. so I grabbed a couple and decided to check out 1-wire. Maxim makes a 1-wire device called the DS18B20. It’s a 9-12 bit temperature sensor with the possibility of being powered by parasitic power from the data line. This cuts the signal path down to a
iButtonLink T-Sense 1-wire sensor (Maxim DS18B20) + PIC 18F14K22 Continue Reading
I’ve seen a number of tutorials about how to build the platform for a 3-axis CNC milling machine. I have not seen anyone tackle the tricky subject of the electronics. Here now is my attempt to do so. Step 1: Parts You’ll need: – an arduino. I chose duemilanova. (depends on the board you get)
Comment câbler un arduino basée sur 3 axes CNC de la machine à l'aide d'arduino Continue Reading
*NOTE* THIS PROJECT IS DONE BY A GROUP OF STUDENTS FROM SINGAPORE POLYTECHNIC. Concept: Trigger gun when laser is blocked by intruding object. Note: Tilting is included for expandability but not used in this project. Skill Level: Basic soldering and basic metal works Things You Need: Toy Gun(Any will do, preferably a semi-auto) Continuous Rotation
La construction d'une Mitrailleuse Laser Voyage Système de Fil et Arduino Continue Reading
French 
English