sensing

BATTERY MANAGEMENT IC WITH UART INTERFACE FOR SENSING AND CELL BALANCING

BATTERY MANAGEMENT IC WITH UART INTERFACE FOR SENSING AND CELL BALANCING

Infineon Technologies AG has expanded its product offering for Battery Management System (BMS) with the TLE9012AQU a new sensing and balancing IC that is designed for batteries in hybrid and electric cars and other applications. It can measure the voltage in up to twelve battery cells with an accuracy of ± 5.8 mV over the entire temperature and voltage […]

BATTERY MANAGEMENT IC WITH UART INTERFACE FOR SENSING AND CELL BALANCING Continue Reading

Resistive Capacitive Sensing Tester For E textiles Soft Sensors and More

Résistif/Capacitif de Détection Testeur (Pour l'E-textiles Doux Capteurs et Plus)

A handy-dandy portable device for testing e-textile sensors on the fly. Sometimes your electronics workspace and your textiles workspace are not the same places. You want to make multiple samples and test them, but then you have to carry your whole electronics prototyping kit (laptop, breadboard, crocodile clips, Arduino etc) and do all the setup.

Résistif/Capacitif de Détection Testeur (Pour l'E-textiles Doux Capteurs et Plus) Continue Reading

Dual Channel Quadrature Hall Effect Bipolar Switch Module for Magnetic Encoder

Dual-Channel Quadrature Hall-Effect Bipolar Switch Module for Magnetic Encoder

The A1230 is a dual-channel, bipolar switch with two Hall-effect sensing elements, each providing a separate digital output for speed and direction signal processing capability. Additionally, it features a Magnetic Encoder for enhanced functionality. The Hall elements are photo lithographically aligned to better than 1 µm. maintaining accurate mechanical location between the two active Hall

Dual-Channel Quadrature Hall-Effect Bipolar Switch Module for Magnetic Encoder Continue Reading

Magnetic Field Measurement Using HMC5883 and Arduino Nano

Magnetic Field Measurement Using HMC5883 and Arduino Nano

The HMC5883is a digital compass designed for low-field magnetic sensing.This device has a wide magnetic field range of +/-8 Oe, and an output rate of 160 Hz. The HMC5883 sensor includes automatic degaussing strap drivers, offset cancellation, and a 12-bit ADC that enables 1° to 2° compass heading accuracy. All I²C Mini Modules are designed

Magnetic Field Measurement Using HMC5883 and Arduino Nano Continue Reading

The Aurora Boxealis – A Color Sensing and Mirroring Project

The Aurora Boxealis – A Color Sensing and Mirroring Project

Introduction Besides looking damned good on an otherwise bland and ordinary desk, this project is about more than just being attention grabbing eye candy.  It’s about demonstrating a small portion of our single board computer capabilities by hooking up a color sensor, RGB light strip, and enclosing it in a nice looking wooden enclosure.  We’re

The Aurora Boxealis – A Color Sensing and Mirroring Project Continue Reading

Sensing Humidity With The SHT15

Détection de l'Humidité Avec La SHT15

The SHT15 is a digital humidity sensor that outputs a fully calibrated humidity reading. And… because what we are measuring is actually relative humidity, and relative humidity being relative to temperature, the SHT15 has a builtin digital thermometer. This makes things much easier to work with than sensors without a thermometer onboard. You can pick

Détection de l'Humidité Avec La SHT15 Continue Reading

Proximity sensor gesture and ambient light sensing ALS module

Proximity sensor, gesture and ambient light sensing (ALS) module

The VL6180X is the latest product based on ST’s patented FlightSense™technology. This is a ground-breaking technology allowing absolute distance to be measured independent of target reflectance. Instead of estimating the distance by measuring the amount of light reflected back from the object (which is significantly influenced by color and surface), the VL6180X precisely measures the

Proximity sensor, gesture and ambient light sensing (ALS) module Continue Reading

Temperature Sensing using DS18B20 Digital Sensors

Détection de la température à l'aide de DS18B20 capteur Numérique

Note: When referring to Arduino below, this works in the same way on the emonTx which is arduino-based. The DS18B20 is a small thermometer with a built in 12bit ADC; it can be easily connected to Arduino digital input. The sensor communicates over a one-wire bus and requires little in the way of additional components.

Détection de la température à l'aide de DS18B20 capteur Numérique Continue Reading

fr_FRFrench
Faire défiler vers le Haut