This page explains how to build an RFID reader with just an Arduino (Nano 3.0 was used in testing, but other models may be compatible), a wire coil made by hand, and various affordable common components. Credits The hardware and software designs for this project are based in part on the ideas, code and schematics […]
BRICOLAGE FSK Lecteur RFID à l'aide d'Arduino Continue Reading
One of the good things about being a maker is the power it gives you to create your own stuff. Believing USB devices have not lived up to their designation of truly being universal and working irrespective of the kind of ports they are plugged into, Hackaday user, Neutrino, recently embarked on a mission to develop devices
A few weeks ago we showed you how to control your arduino over serial. Well this week are going to do the same thing. Only this time instead of using the serial monitor to send the commands, we will be using the Innovations ID line RFID reader. RFID, or Radio Frequency Identification, is basically a
Pouvez-Vous ID Ce? ID-20 Lecteur RFID + Arduino Continue Reading
Surya Mattu is a creative technologist who loves to make things. He’s based in NYC and working at ITP, a two-year graduate program exploring the imaginative use of communications technologies. Today he’s sharing with us how feasible it could be to build an RFID-controlled entry for students using Arduino Yún. Read other guest posts on Arduino Yún.
Faire un Lecteur de Carte RFID avec Arduino Yún Continue Reading
I just received my RC522 RFID reader and made this simple Arduino access control system that uses the reader, a buzzer for the alarm and a relay shield for the security system. The relay can be used to open a door lock and if you need a louder alarm then you can replace the small
Arduino RFID Lecteur RC522 + Système de Contrôle d'Accès Continue Reading
Everyone has used a magnetic card reader, I believe. I mean, who carries cash these days? They’re not difficult to get your hands on, either, and during a trip to my favorite local electronics shop, I found a bin full of these guys. So….of course, I picked one up and brought it home to see
Transformez votre Arduino dans un Lecteur de Carte Magnétique! Continue Reading
f you’ve ever wanted the ability to use some form of hardware-based authentication in your projects then this is the board to do it with. The Parallax RFID (Radio Frequency Identification) reader is super easy to configure. It only takes four wires! It uses serial protocol to transfer information from RFID cards to the Arduino.
À l'aide de la Parallaxe Lecteur RFID avec un Arduino Continue Reading
French 
English