Schematic Since the IR Sensor uses a light sensor, the schematic is very similar to that of the light sensor. The only difference is the addition of an IR LED and that the IR detector requires connection to 5V and ground. Breadboard Setup To setup the sensors you will need: 2x IR Detectors 2x IR […]
Raccordement d'un Capteur INFRAROUGE à l'Aide d'Arduino Continue Reading
Measuring the speed/rpm of a Vehicle or a motor has always been a fascinating project to try. In this project, we are going to build a Analog Speedometer using the Arduino. We will use IR Sensor module to measure the speed. There are other ways/sensors for this, like hall sensor to measure speed, but using an IR
Vitesse analogique à l'Aide d'Arduino et Capteur IR Continue Reading
Well, looks like my sonar sensor (SRF05) is a just a tad inaccurate for precise measurement as I found from my radar screen I made (Arduino Radar Sscreen). So I’ve got hold of a Sharp GP2Y0A02 series infrared distance sensor. It’ll detect and measure anything within a 20-150cm range and it does this by triangulation
Arduino – à l'Aide d'un Capteur INFRAROUGE Sharp pour le Calcul de la Distance de Continue Reading
French 
English