Hey, welcome to my first instructable where I will be helping you create a calculator. It’s basically made up of a 16×2 LCD, with an Arduino UNO that you can use in order to make quick calculations from far distances. I know, it doesn’t make sense right, well I did not have a keypad but […]
In today’s Instructable, I’ll show you how you can use a generic RF module without a microcontroller which will eventually lead us to build a project where you can convert an IR Remote of any device to a RF Remote. The main advantage of converting an IR Remote to RF, is that, you don’t have
Convertir Votre Télécommande IR pour Télécommande RF Continue Reading
My First ever Robot. It tracks objects using Infra-red sensors, and has basic AI that follows and avoid objects. I will describe the how I made this robot, and upload some videos. Version 1 (16 Dec 2011): —————–The components used ———————- I actually planned this robot before making it. I didn’t use all the parts
Wally – Détection IR Robot à l'aide d'Arduino Continue Reading
I have several times. My favorite technique was to take my mobile phone and with the camera pointed at the infrared emitter look for a flashing little purple light. The mobile phone technique is an way for testing the remote but still i decided to make a small circuit just to test the remotes. Ler
I’m tired of these complicated tutorials on how to use certain things. I like simple, easy to understand, step by step instructions. My biggest problem was with IR and POV*. I’ve finally mastered how to control my project with any TV remote in a few minutes. In this i’ble I’m going to show you simple,
Comment Utiliser une télécommande IR avec Arduino (à Jour) Continue Reading
Hi everyone. This my new project IR remote control robot using arduino. This is a simple design robot you can easily build it. Step 1: Requirements: Project requirements: Arduino uno Tsop1738 (ir receiver) H bridge ic (L293D) Two dc motor A robot base 9v Battery Step 2: Circuit Diagram For The circuit diagram refer the
ARDUINO en fonction de télécommande IR robot à l'aide d'arduino Continue Reading
I have been successful in programming my Arduino to identify sets of digits transmitted from my Samsung remote. I used the excellent library at http://www.arcfn.com/2009/08/multi-protocol-infrared-remote-library.html as a starting point. I stripped out everything that wasn’t a raw number, and started logging what numbers came across the serial monitor as I pressed buttons. I then created
French 
English