The dB (decibel) is one of the most common units in engineering, yet also one of the most confusing, especially when it comes to manipulating S-parameters. Here is how not to be confused. The Bel is a fundamentally new unit, which was originally established in 1928 by The Bell System to describe sound levels. This […]
In this section we will explain exactly how you can create your own Amblone setup, consisting of 3 RGB LED strips and an Arduino Mega. What do I need? To create the Amblone setup described in this guide, you will need the following: Amblone software An Arduino microcontroller, for example the Arduino Mega A USB
BRICOLAGE Guide pour Amblone de Lumière de LED Continue Reading
Hey, I am a big fan of Instructables. I have consistently used it for the past 3 years and now its time for me to write one myself.Here we go. This instructable is for those who want to make some inanimate object tweet automatically. Like say for example you are building a robot and you want the
Comment tweeter à partir d'un Arduino en utilisant le wifi shield Continue Reading
In this article, we go over how to build a piezo knock sensor circuit. A knock sensor is a sensor which produces a voltage in response to some type of physical stress such as a knock or vibration. This is why it’s called a knock sensor; it detects knocks. This sensor can be useful when
Comment Construire un (Piézo) Capteur de cliquetis Circuit Continue Reading
An h-bridge is a chip that allows DC motors to be run versatile, with bidirectional capability. With an H-bridge, motors can go forward or backward, left or right, up or down, etc, depending on the use of the motor(s) in the circuit. Without a microcontroller, the only way to be able to control an H-bridge
Comment Construire un pont en H Circuit avec un Microcontrôleur Arduino Continue Reading
French 
English