A easy to use adaptable sensor and notification system that is designed to be used as a temporary change of state notifier. Things used in this project Hardware components Arduino MKR1000 × 1 PIR Motion Sensor (generic) × 1 SW-420 Motion Sensor Module Vibration Switch Alarm Sensor Module for Arduino × 1 Light Dependent Resistor […]
Adaptable Capteur et Système de Notification Continue Reading
Connect your door to the Cloud and open it from everywhere. Story The Doorbell is a great example of how to connect your devices to Arduino Cloud and make them talk to each other. The Doorbell allows you to open the door from everywhere as long as a WiFi network is available. The project is
Set LED RGB light Scenes remotely Things used in this project Hardware components Arduino MKR1000 × 1 Breadboard (generic) × 1 RGB Diffused Common Cathode × 1 Story Using MKR1000 to control an RGB LED device. In our shortened example we will use a single RGB LED. In real world we would attach the RGB
This simple project shows how to make an app that controls an Arduino MKR1000 board with Evothings Studio by communicating over the TCP. Things used in this project Hardware components Arduino MKR1000 × 1 LED (generic) × 1 Resistor 100 ohm × 1 Jumper wires (generic) × 1 Breadboard (generic) × 1 Software apps and
Créer des Applications Mobiles pour Android et iOS de la Connexion à la MKR Continue Reading
Using Arduino/ Genuino MKR1000 to connect ARTIK Cloud control I/O light LED. Things used in this project Hardware components Arduino MKR1000 × 1 Software apps and online services Samsung ARTIK Cloud for IoT Story https://www.arduino.cc/en/Main/ArduinoMKR1000 A simple project let mkr1000 connect to artik cloud, but it took me 2 weeks time. Since there are few
Start Connect ARTIK Cloud avec Arduino/Genuino MKR1000 Continue Reading
Water quality data monitoring for swimming pools, fish aquarium and more! Things used in this project Hardware components Arduino MKR1000 × 1 Jumper wires (generic) × 1 DFRobot pH Meter × 1 Resistor 4.75k ohm × 1 Temperature probe × 1 Software apps and online services Samsung ARTIK Cloud for IoT Arduino IDE Story I.
De l'eau Surveillance de la Qualité de l'Aide MKR1000 et ARTIK Cloud Continue Reading
The Arduino Gatekeeper is an IoT-connected authenticator for outdoor gates and doors. No longer are keys required for secure backyards! Story Introduction The Arduino Gatekeeper is an IoT-connected authenticator for outdoor gates and doors (or anything else that can be monitored with reed switches). The first function of the device is to remotely monitor when
In this project, we will use a 4Duino and several IR sensors to create a simple pet food dispenser. 4Duino checks whether a food tray contains enough food or not. It is programmed to read IR values from each sensor. These values change depending on the amount of food in the container. The feeding time can
Distributeur de Nourriture pour animaux de compagnie, mettant en vedette 4Duino-24 Continue Reading
In this project we will use an existing FM radio which went repair a long time ago, to convert it into a Smart Wireless FM Radio controlled using Phone, with the help of Arduino and Processing. We can convert any manually operated electronic device into a Smart Device using the same procedure. Every electronic device
Téléphone intelligent Contrôlé de Radio FM à l'aide d'Arduino et de Traitement Continue Reading
The provided software is based on USB Virtual Com Port (VCP) device. The setup is done with command line interface using terminal from any PC. The setup is stored in the internal flash and PC is not required for normal operation. The mini beacon keyer can be used when powered with 5V. For proper operation
French 
English