SudoProc – A solderable 1.8GHz Quad Cortex-A17 module With 4GB RAM and HDMI 2.0

A Slovenia based startup Sudo Systems will soon launch a module called SudoProc. This module is highly compact (65 x 40 x 4.3mm) and solderable. It contains Rockchip’s 1.8GHz, quad-core, Cortex-A17 SoC RK3288 SoC with 600MHz Mali-T764 GPU. The highlighted feature set includes 4GB of dual-channel 1066MHz LPDDR3 RAM. SudoProc also includes an embedded security engine, a Gigabit Ethernet controller, and support for HDMI 2.0 4K with 10-bit H.265 video decoding.

SudoProc – A solderable 1.8GHz Quad Cortex-A17 module With 4GB RAM and HDMI 2.0

This is only the second, independently available RK3288-based “computer-on-module” available out there. Boardcon’s MINI3288 is also available on its sandwich-style EM3288 SBC. The RK3288 is the backbone of Android mini-PCs and also powers several Linux/Android-based open source Single Board Computers(SBC). The SudoProc supports Android 5.0 to 7.0, as well as Debian, Ubuntu, and an in-house developed SudoOS Linux distribution.

The SudoProc module offers a lot of RAM along with a huge amount of onboard eMMC 4.5 32GB storage. It is expandable up to 512GB. There’s also support for 2x SDIO 3.0. It has HDMI 2.0 for video support and SPDIF et I2S/PCM take care of Audio.

The 218-pin SudoProc is further provided with interfaces including USB 2.0 host and OTG, as well as 5x UART, 5x I2C, 3x SPI, 4x PWM with the interrupt. SudoProc also has up to 100 GPIOs which are programmable as interrupt inputs. Other listed I/Os includes 3-channel, 10-bit SARADC, 8-bit TS stream shared with CIF, a “Host” interface shared with GMAC, and a GPS interface. On-demand optional I/O incorporates HSIC 2.0, PS/2et Smart Card.

The 5V/3A module supports 1.8V to 3.3V logic level output and allows remote control of the PMIC. Sudo Systems did a good job with its thermal dissipation design. There’s an integrated heatsink to take care of it. With the maximum thermal dissipation of 10W, the module’s estimated workings temperature is 25°C to 85°C.

In February, the SudoProc will open for pre-orders in limited quantities and will be shipped by March. The price is about $300, including a development board of the module. For further information, contact Sudo Systems at [email protected].

Read more: SudoProc – A solderable 1.8GHz Quad Cortex-A17 module With 4GB RAM and HDMI 2.0


A Propos De L'Auteur

Ibrar Ayyub

Je suis expérimenté, rédacteur technique, titulaire d'une Maîtrise en informatique de BZU Multan, Pakistan à l'Université. Avec un arrière-plan couvrant diverses industries, notamment en matière de domotique et de l'ingénierie, j'ai perfectionné mes compétences dans la rédaction claire et concise du contenu. Compétent en tirant parti de l'infographie et des diagrammes, je m'efforce de simplifier des concepts complexes pour les lecteurs. Ma force réside dans une recherche approfondie et de présenter l'information de façon structurée et logique format.

Suivez-Nous:
LinkedinTwitter

Laisser un Commentaire

Votre adresse e-mail ne sera pas publiée. Les champs obligatoires sont indiqués avec *

fr_FRFrench
Faire défiler vers le Haut