Basic information The DS1631 is a low cost, I2C interface digital thermometer popular in the maker community. Capable of providing 12-bit temperature readings over a -55°C to +125°C range. I have need for a digital thermometer in many of my projects and thought it would be nice to do a simple validation against a standard […]
DS1631 – Code Arduino et de la Température de Validation Continue Reading
This Instructable shows you how to build a micro-controller based weather monitoring device. Built on the Arduino Uno board it can easily be extended and modified should you have additional sensors at hand. Main requirements: – Measure temperature (accuracy +/- 0,5 degree Kelvin) – Measure barometric air pressure (+/- 0,1 Pascal) – Display measured values
This is how to push high resolution real-time data from Arduino-based temperature sensor to your web page without any server-side coding. Arduino is a great device for collecting, storing and transferring data from various sensors but there are times you need to make your data accessible from any place over the internet, like I did
En temps réel la température de la pièce sur votre Site web en utilisant Arduino Continue Reading
Overview This board allows you to use a thermistor to measure the temperature of something. It is designed to be used to measure things in the range of 100C – 300C, but with the proper calibration and resistors, it can be adapted to any temperature range you need (under 300C). If you need something that
Block Diagram This diagram shows the basic components required for collecting temperature readings from seawater and transmitting the data to a base station where it can be collated into a database for analysis. To the left is a schematic of 10 temperature sensors, spaced 1 metre apart and immersed in seawater to a depth of
Les Détails techniques de l'enregistrement de la Température de l'eau Continue Reading
The last few weeks I was playing with Firebase mostly because I wanted to get familiar with this technology. So at some point I thought that it will be a great idea to connect Arduino with Firebase. Imagine that you have a simple temperature sensor that measures the boiler’s water temperature every few minutes and
Magasin Arduino données de Firebase base de données [Howto] Continue Reading
At University, Alexander Zenger and I decided to realize a weatherstation with an Arduino Microcontroller. We wanted to measure temperature, pressure and humidity. It should be also possible to get every 5 min a value update on an external server. Our basic idea was to develop a weatherstation which is easy to use with different
This project consists of two temperatures that are measured by the Arduino using two MCP9700 temperature sensors An Arduino Uno and Ethernet shield are set up as a web server that hosts a web page to display the two temperatures on two gauges. The web page is stored on a SD card that is plugged
Serveur Web avec Deux mesures de la Température Continue Reading
Sous-vide cooking allows you to precisely control the temperature of cooked food (how “doneness” is measured) by immersing it in a carefully controlled water bath. It’s possible, but seriously difficult, to do this just with a thermometer and a pot on the stove… but if you have an Arduino do all the hard work for
As part of the CanSat Primary Mission, we need to measure temperature. For this our starter kit has given us an Arduino Uno R3 micro-controller, as well as some resistors and an NTCLE101E3 NTC Thermistor. The thermistor is a special kind of resistor that changes its resistance with temperature. In our case we have an
French 
English