Hardware components: MediaTek Labs The MediaTek LinkIt™ Smart 7688 platform × 1 Everything ESP ESP8266 ESP-01 × 1 Arduino Nano R3 × 1 Atmel ATTiny85 × 1 DHT22 Temperature Sensor × 1 Servo (generic) × 1 Software apps and online services: Arduino IDE STORY Winter is coming When my wife and I had our first child […]
Le zonage de la télécommande avec MediaTek Lienil™ Smart 7688 Continue Reading
A Thermistor is a thermal-resistor. It’s just a simple device that changes it’s resistance based on temperature. If the LRD/Photoresistor is day of of arduino class. The thermistor should be day 1.01. (Can I do that?). If you need precise temperature readings, this is not the part for you. Check out the DS18B20, TMP102, or
Simple De Température À Thermistance + Arduino Continue Reading
The BMP180 is a new generation digital barometric pressure and temperature sensor from Bosch Sensortec. In this tutorial, we will briefly review this device and describe how to interface it with an Arduino Uno board for measuring the surrounding temperature and pressure. We will also discuss about retrieving the sensor altitude from its pressure readings. Experiment setup
À l'aide de BMP180 de la température, la pression et l'altitude des mesures Continue Reading
In this project, we are going to make an Arduino Temperature logger that will get the temperature value from the LM35 temperature sensor and the time from the DS3231 Real Time Clock module. Then we will store these values in the SD card file using the mini SD card Module. After that, we will access
Comment Faire un Arduino Enregistreur de Température Continue Reading
Humidity and Temperature are very common parameters for measuring at many places like farm, green house, medical, industries home and offices. We have already covered Humidity and Temperature Measurement using Arduino and displayed the data on LCD. In this IoT project we are going to Monitor Humidity and Temperature over the internet using ThingSpeak where we will show
Story Have you ever wanted to make your own interface that can display the time, date, along with the temperature and the humidity? Well it’s a lot easier than you’d think. A few important components are needed, as shown below. Arduino Uno/Nano Firstly we will be needing a micro controller. I used an Arduino Uno
Affichage de l'humidité de la Date, de l'Heure et de la Température Continue Reading
In this Arduino based project, we are going to control DC fan speed according to the room temperature and show these parameter changes on a 16×2 LCD display. It is accomplished by the data communications between Arduino, LCD, DHT11 sensor Module and DC fan that is controlled by using PWM. PWM is a technique by
Humidity and temperature are common parameters to measure environmental conditions. In this Arduino based project we are going to measure ambient temperature and humidity and display it on a 16×2 LCD screen. A combined te mperature and himidity sensor DHT11 is used with Arduino uno to develop this Celsius scale thermometer and percentage scale humidity
L'humidité et la Température de Mesure à l'aide d'Arduino Continue Reading
In this article, we are presenting a tutorial on how to interface LM35 and Arduino along with its program. Once we successfully interface arduino and lm35, we will go on to build a temperature display using arduino and a 16×2 LCD module which constantly monitors temperature around the measurement field/range of LM35 and displays the
LM35 et Arduino – Mesure de la Température et Affichage sur l'écran LCD Continue Reading
Simple temperature logger using arduino (°C & °F). This project is about a simple USB temperature logging system using arduino uno and the serial monitor function in the arduino IDE. The system monitors the temperature every 2 seconds and shows it on the arduino serial monitor. The temperature is shown in °Celsius and °Fahrenheit. The system is interfaced
Enregistreur de température à l'aide d'arduino Continue Reading
French 
English