This is my first build using an arduino microcontroller. I wanted to create a simple tone output device along the lines of the 555-basedatari punk console, but using solely the mcu as the tone generator. Unfortunately, that was just too simple a task with a microcontroller to play with–it was done in about five minutes and my […]
I was inspired by Frits Lyneborg’s Yellow Drum Machine. Watching the videos, it has such personality! I have also been thinking recently about sound and robotics. I did some research looking for a version of the robot that used the Arduino as a brain, but couldn’t find one that seemed so responsive and alive as
La Vengeance du Jaune Tambour de la Machine (Arduino) Continue Reading
This project is a part of experiments done while doing an artist in residence at Instructables. You can see the other projects here. Making a plant sing has been a trick since the Theremin was invented. Here I am going to teach you how to do this with and arduino board, a gameduino shield and a the touch shield
Wrap Beats is an instrument that lets you string together notes in order to create different melodies and visual patterns. I constructed it using the Capacitive sensing library for Arduino and combining that with the music abilities of processing to create a dynamic instrument that can change sounds as you play it. The circular design
Enveloppez-Beats – Capsense Arduino Instrument Continue Reading
The RFI-DJ is a USB device for playing MP3 files from your computer. You have a set of RFID cards, each one with a song name written on it. You choose a card and place it on the RFI-DJ, and your computer will play that song. Its magic! Actually, it’s not magic. It uses an
During the First Meeting of Electronic Arts in Florianópolis, we built a Breathalyzer using the Alcohol Gas Sensor MQ-3 and a Arduino Board to use in the last day of the meeting, in which we gave a party. You can see a quick video two posts below. Last days I received many emails asking for
La construction d'un Alcootest avec MQ-3 et Arduino Continue Reading
Using an Apple Pro speaker, I made a flashing RGB LED iPod dock for about $35. I recommend reading the entire ‘ible before starting. Also, note that the volume is control from the iPod. It consumes minimal power in shutdown mode, and is controlled by a Teensy. This took me ~3 days to build, and
RVB clignotant station d'accueil pour iPod à partir d'un vieux haut-parleur Continue Reading
Concept: Very simple, using an Arduino and the play melody basic program, create a music playing speaker out of a vibration motor and a piece of flexible foam. Instead of pulsing signal to a speaker, signal is pulsed to a motor varying how fast it can spin and when it spins. Science behind it (this
Les Vibrations Du Moteur En Mousse Haut-Parleur À L'Aide D'Arduino Continue Reading
Theremins are cool. Fact. You may also have heard of them as either aetherphone/ etherophone or termenvox/ thereminvox. Essentially its an electronic music instrument that plays a certain note depending on the position of your hand and its distance from an antenna. Building a very basic one with Arduino is easy – easier than my
This project is a part of experiments done while doing an artist in residence at Instructables. You can see the other projects here. You can use bit-shifting as an alternative way of creating “music”. This principle enables you to squeeze as much processing power as possible out of the Arduino while creating novel and interesting
Construire Un Algorithme Pour Le Bruit De La Machine À L'Aide D'Arduino Continue Reading
French 
English