I’ve just completed my second Arduino project, a sound level detector which sets off an “alarm” when there’s the sound level is to high for too long. I built it for use in a school that wants to provide visual feedback to students when they are being too loud. The “alarm” is a string of […]
I’ve just completed my second Arduino project, a sound level detector which sets off an “alarm” when there’s the sound level is to high for too long. I built it for use in a school that wants to provide visual feedback to students when they are being too loud. The “alarm” is a string of
Significance Addresses critical safety concerns in mining which is inherently hazardous work Leverages IoT and Arduino to develop a comprehensive safety monitoring system Has potential to significantly reduce accidents and improve standards if implemented widely Methodology Utilizes various sensors to monitor environmental parameters like temperature, gas levels etc Interfaces sensors with Arduino microcontrollers for centralized
L'Ido À Base De Puce De La Mine De Système De Sécurité À L'Aide D'Arduino Continue Reading
This project demonstrates an Arduino Uno-based window alarm annunciator system. Annunciators are commonly employed in industrial settings like manufacturing facilities, power plants, and other process operations to monitor changing plant conditions. The annunciator alerts operators to any abnormal or deviant parameter readings that require attention. Similarly, such a device can serve as a home security
Améliorer la Sécurité à la Maison avec un Arduino DIY Fenêtre d'Alarme Annonciateur Continue Reading
This tutorial provides a straightforward guide for crafting a small security device with an Arduino. Step 1: Assemble Materials Step 2: Setup Attach a red wire from the 5V pin on the Arduino to the positive segment of the breadboard. Establish a connection with a black wire from the GND pin on the Arduino to
This week I continued developing a device that warns of the potential of a knockdown – the process by which an over-canvassed sailing ship is lain over on her beam-ends during a squall. The potential for sinking at this point is high, especially if there are hatches open on the leeward side, so it is
Knockdown Indicateur D'Avertissement (Redux) Continue Reading
~~ The complete kit for this tutorial is now for sale at www.razvantech.com Get one! ~~ This instructable will show you how to make a pass-code lock system using the Arduino Mega board. Whenyou type the right code, an LED lights up an the servo moves to open a lock. What you will need: —>one
In this project I will discuss how you can make a cheap wireless home security system.Though during starting of this project the main objective was only for security alarm but later I found this device can be used to solve several problems.These are the few practical problems which I have faced in the past :
ARDUINO SANS FIL, SYSTÈME DE SÉCURITÉ À DOMICILE Continue Reading
This is Tahir Ul Haq, bringing you another exciting and innovative Tiva Micro-controller based project. This is the third instructables in the Series. Hope you will like it. This time it is Bar-code Based Complete Security and Enrollment System. The project focuses on a bar-code based security and enrollment system. In this project, a Bluetooth
Code-barres à Base de Sécurité Complet et l'Inscription du Système à l'Aide de Tiva Continue Reading
Use a Classic Nintendo controller to lock and unlock your door! The output from the Controller is read by an arduino and it looks for a particular combination of buttons, once the combination is entered it sends a signal to eject a Cd-Rom Drive which pushes or pulls the lock. I started making this project
Nintendo Système d'Entrée sans clé à l'aide d'un Arduino Continue Reading
French 
English