I pull my curtain up and down a couple of times a day. If I watch a movie I pull it down and then, I pull it up to get better lighting. I also pull it down when I go to sleep and I pull it up again when I wake up. I want this […]
Motorisé Déroulant Rideau (Numéro De Téléphone Et Radio Contrôlée) Continue Reading
Dear friends welcome to another Instructable! Today we are going to build an Internet Radio device with a big 3.5” display using an inexpensive ESP32 board. Believe it or not, we can now build an Internet Radio in less than 10 minutes and with less than 30$. There is a lot to cover so, let’s get started!
The affordable MP3 VS1053 codec processor available on aliexpress.com is said to have the ability to decode different music formats such as Ogg Vorbis/MP3/AAC/WMA/MIDI audio. VS1053 can also record in Ogg Vobis file, but the available guidance online is mainly for proprietary boards or ESP32-IDF, which is not recommended due to the amount of coding
I own two excellent AM transmitters – one is homemade with a single 6888 Tube and the other is a restored old KnightKit Broadcaster. Additionally, I have a high-quality solid state transmitter from SSTRAN that I use to broadcast music to my collection of repaired or refurbished antique AM radios. I desired a top-notch FM
Un FM Stéréo Diffuseur PLL à l'aide d'Arduino Continue Reading
This is what came out of my attempt at combining some of my favorite tools and themes…Grasshopper, 3D printing, kinetic motion, and linguistics. I put these gloves on my friends, asked them to tell me a story, and used Grasshopper to record the data from their hand gestures. While these gloves are far from precise
La conversation des Gants à l'aide d'arduino Continue Reading
OBJECTIVE Cheap Chinese RC toy cars can be had for about 5 Euros in the local market. The wireless brains behind the majority of these cheap RC toys is a pair of very cheap ICs the TX2 and the RX2. Yup, that’s what they are called. So this tutorial is focused on the TX2/RX2 based remote controlled toys.
Arduino contrôles à bas prix voiture RC émetteur Continue Reading
Is it flying seal? A flapping alien? No it’s a ZAPpelin, an Arduino controlled indoor blimp, setup to learn in the signals from an IR remote to command it. This project came to life at the third Arduino Jam Februari 15th to17th 2013, at Timelab, Ghent, Belgium. Our team consisted of: –charles32 –mgossye –myself (masynmachien)
I had a traffic light that I was refinishing. The only thing left to do was to build the controller for the light’s signal patterns. To give it a twist I incorporated a remote control. This was also the perfect opportunity for me to try out an Arduino. I wanted to use the Arduino becuase
If you have read my first blog on the topic, than you already know what I’m experimenting with. Low price FM Radio, build with TDA7088 / YD 9088. It was obvious, that technology from the early 90-x is outdated. I mean, simple “search and hold” function of the radio. Scan function works only one way, up in
After I finished my last project, I couldn’t stop thinking how to build an AM receiver, that would also operate in conjunction with my little friend Arduino. To minimize a workload and complexity, especially with RF part of the circuitry, I come up to conclusion, that SDR (Software Defined Radio) is the best choice for
French 
English