This is what came out of my attempt at combining some of my favorite tools and themes…Grasshopper, 3D printing, kinetic motion, and linguistics. I put these gloves on my friends, asked them to tell me a story, and used Grasshopper to record the data from their hand gestures. While these gloves are far from precise […]
La conversation des Gants à l'aide d'arduino Continue Reading
Construction Mechanical structure Compressed air comes from air compressor and goes in the proportional valve. Coming out from the proportional valve, there are two branches of air flow (one is compressor air, the other one is exhausted air) which connect to the air cylinder (pneumatic actuator). The pneumatic actuator connects to a cart (the aluminum
In this tutorial, I’ll show you how to use a wireless PlayStation 2 (PS2) controller and an Arduino Uno pilot a robotic tank. Story An Arduino Uno board was used at the core of this project. It receives commands from the wireless controller and sets the speed of the motors. Other development boards might also
Arduino Robot Avec manette PS2 (PlayStation 2 Joystick) Continue Reading
This is a very easy project. Here is the result I won’t go into too much detail how each part works, because I have written some information on my blog. But you should be able to make it work with the information given on this instructable. Step 1: Prepare RGB LED strip The RGB LEDs
Faire votre propre TV ambilight l'aide d'Arduino Continue Reading
A while ago, I made the ESP32 version of Midbar which later evolved into a multi-user Cipherbox. While developing the Cipherbox, I realized that even the Lite version of it might be too expensive and too redundant for some people, so I “resurrected” the single-user Midbar project and made an ESP8266 version of it. The purpose of Midbar is to
Comment Construire un Midbar ESP8266 Version Continue Reading
So there I was, browsing eBay, looking for some cheap deals on Atmel chips when i came across a pair of ATTiny13 chips for £2.50. I just had to have them! After all, how hard can it be? I needed a small chip to read servo signals from a hobby RC Receiver and control a
Programming an ATTiny13A using Arduino & servo interpreter Continue Reading
4./ Interactivity & electronics 4.1/ Switches / characters 4.2/ Screen / interface 4.3/ Motor controller 4.4/ I/O controller & interface [4./ electronics] [4.1/ switches / characters] The characters on top of the moving platform function, as interfaces, actually as on-off switches. While standing in its position on the platform that keep a switch on. Once
In this one, servo is programmed to be controlled by two buttons, one turns servo to the left and the other one turns it to the right. When the servo is turning, corresponding LED will be switched on to indicate the operation. Result: Because Arduino has built-in library for controlling servo, which makes servo a
Comment contrôler un Servo à l'aide d'Arduino Continue Reading
Ever asked how to control any device from any place in the world? In this tutorial, we’ll learn how to control things wirelessly over WiFi. Story Introduction Today, we will build a device that connects to the internet and allow the user to control his/her home remotely over wifi. We will use the Arduino board(any
This simple device sits on your desk at work, ready to give you fist bumps throughout the day as you need them. A 3D printed “fist” is moved by a servo attached to a rack and pinion mechanism. An ultrasonic range finder detects when you place your hand near it, and an Arduino Uno controls
Bureau de Poing de Pare-chocs à l'aide de arudino Continue Reading
French 
English