The TiltKey is a keyboard input device based on tilting. Based on the angle that it is tilted at, and the direction it is tilted in, you can write every letter of the alphabet, every number, and every symbol found on a standard US keyboard. Operation is very simple; the LCD display shows the letter […]
This gesture controlled robot uses Arduino,ADXL335 accelerometer and RF transmitter-receiver pair. We will divide the entire robot into 3 parts the transmitter,the receiver and the robot. The different gestures that have been mapped to the direction of the bot are- Hand parallel to the ground-stationary Hand tilted forward-forward Hand tilted backward-backward Hand tilted right-right Hand
Demonstrates the use of the analogWrite() function in fading an LED off and on. AnalogWrite uses pulse width modulation (PWM), turning a digital pin on and off very quickly, to create a fading effect. Circuit Connect the anode (the longer, positive leg) of your LED to digital output pin 9 on your Arduino through a 220-ohm resistor. Connect the cathode (the shorter, negative leg)
La décoloration d'une LED éteinte et sur l'utilisation de l'Arduino Continue Reading
Required Parts: This project requires two Arduino boards which can be bought from http://www.adafruit.com/category/17 This project uses two Arduino Uno compatible boards. An L293D or other Dual H-Bridge Motor Driver chip will be needed to drive the motors of the RC car. This can be found here: http://www.adafruit.com/products/807 Finally, this project requires the RF transmitter
Contrôlé par ordinateur RC voiture avec deux Arduinos Continue Reading
RC MOOD LYTE is a commercial quality flameless light engine for heavy, everyday use in the home, restaurant, catering and hospitality industry ,a great improvement over the traditional wax candles in terms of safety and reliability features . LED Candles have No wax, No smoke, No heat, No mess. ECO BENEFITS Safety: eliminates fire danger
Anirudh Sharma, an IT Engineer from Rajasthan Technical University has developed a system that offers non-obtrusive navigation for the visually impaired . Calling it Le Chal (Hindi for ‘Take me there’), Sharma conceptualized and demonstrated the system at MIT (Massachusetts Institute of Technology) Media Lab Design and Innovation Workshop 2011. The Le Chal system comprises
Arduino Lilypad alimenté shooes pour les déficients visuels Continue Reading
Naturally, the Uno does not natively support keyboard strokes, unlike it’s Leonardo brother. Most of Google will tell you you need to do some firmware workarounds and ATMEGA reprogramming just to get it working and the entire ordeal is a mess. If you’re like me, you’ve found that out just after buying one. Here is
À l'aide d'un Arduino Uno R3 comme un Contrôleur de Jeu Continue Reading
This is a fun project that can be done easily and also cheaply. In this instructable we will explain step by step how to make this beautiful POV clock. Used material: Arduino Uno, RTC modul, ULN 2003, IR diode and IR transistor (used like a sensor, more details in next steps) 4 pushbuttons (for controling
Le Disque dur de l'Horloge (HDD Horloge avec Arduino Uno) Continue Reading
Its been awhile since i last posted something here. Was kinda busy with my university exams & all! Idea for this project was in my mind for very long & i don’t think anyone would’ve done this project with Autohotkey! Anyway, this is a necessity for me, honestly i’m a super lazy person & i
L'Automatisation De La Maison En Utilisant Arduino & Autohotkey Continue Reading
Greetings! I’m Russell Petersen. I’m an engineer, inventor, designer, fabricator, and dreamer. I’m a junior Electrical Engineer by trade, located and working in the San Francisco Bay Area. I love playing with Solid State Lighting, and came up with this idea one night. Simply stated, It’s a custom built light box with a logo adhered
French 
English