Well it’s that time of year again. That’s right, the sun is going down early, and it’s getting hard to avoid logging some miles on your bike after dark. You likely have great lights front and rear already, but what about on the sides of your bike? When crossing intersections, and cruising down those long […]
Clignotement de la LED Tube Supérieur Pad pour votre moto à l'aide d'Arduino Continue Reading
Have you ever wanted to use a good old knob to control your TV volume instead of repeated button pushing? Or make it controlled by light? Do you want your remote to be replaced by an awesome arduino and let it do the hard work of using a remote for you? Well this instructable is
La commande du TÉLÉVISEUR à l'aide de fonctions d'entrée Analogique et Arduino Continue Reading
Summary: The following is a step by step guide on how to make a Heat-Seeking Desk Fan from an Arduino microcontroller, a computer fan, a servo, and an infrared temperature sensor. The device scans the room periodically, automatically pointing itself in the hottest direction (ideally towards a person). This is a working proof-of-concept model, but it
La chaleur de Recherche de Bureau Ventilateur (à l'aide d'Arduino) Continue Reading
I made a little automatic slipper foot massager with the Lilypad Arduino and some of the Lilypad Vibe Boards for the actual massager. The sensor it uses is a Lilypad Accelerometer that I’m only using as a basic tilt sensor. Essentially it detects when the slipper is in a more vertical position (like when you
Arduino Lilypad Pantoufle Automatique De Massager De Pied Continue Reading
This Instructable details how to build a holiday dreidel display for your roof. It uses coat hanger wire, rope light, and an Arduino controller to control a fading demo mode and a “spin” mode. In the demo mode, the symbols fade in and out, going from one to another. In “spin” mode, the symbols flash
Vacances Toupie Lumineuse de l'Affichage de Toit à l'aide d'Arduino Continue Reading
This was inspired by Raj’s personal soundtrack shirt in Big Bang Theory S3, E16, “The Excelsior Acquisition”. You can now buy them online but it’s much more fun to make your own and it’s possible now that buttons designed for use in electronic clothing are available from Connectedwear. Nine of the buttons on the Connectedwear
This instructable builds on top of the Geiger counter triggered LED decorations I made last year. This version powers the Geiger counter from the Arduino (itself now powered from a mains adaptor, so I no longer need to keep feeding them batteries) and the LEDs now fade in and out for a more gentle effect.
Star Jar compteur Geiger déclenché décoration CONDUIT à l'aide d'Arduino Continue Reading
Have you ever wanted a little plant to brighten up your desk or home, but you’re afraid that you’ll forget to water it? Fear no longer! Using an Arduino, a scavenged wall-wart, and a peristaltic pump, you can set up your plant to be watered as often as you like, from a jug or any
This is a project I came up with that was inspired by my love for bacon! This is an alarm clock that is designed to wake you up with the smell of bacon. With the help of an arduino the alarm clock will already have the bacon aroma filling the room to wake you up
I call this project “The Motivational Moody Workout T-Shirt” . Basically what I wanted to do was a t-shirt that makes you want to get out in the open and work out. To make that work, I sewed a LilyPad arduino onto a t-shirt and powered it with a solar panel. Then I connected a
La Motivation Moody's T-Shirt d'Entraînement à l'aide d'un Arduino Continue Reading
French 
English